Dicas Reparação SONY
Modelo - Chassis
Pesquisa: SONY Enviar Dica Resolvida
Resultados 18945
Pedir dica reparação
| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV1929R | CB INTERFERENCE, SEE SB CTV288R | CB interference heard from the speaker, even when the set isoff. -HQ COMMENTS: Please refer to service bulletin No. CTV288R. | ||
| Sony | KV1997R | CB INTERFERENCE | CB interference heard from the speaker, even when the set isoff. -HQ COMMENTS: Please refer to service bulletin No. CTV288R. | ||
| Sony | KV1926R | CB INTERFERENCE, SEE SB CTV288R | CB interference heard from the speaker, even when the set isoff. -HQ COMMENTS: Please refer to service bulletin No. CTV288R. | ||
| Sony | CDPC9ESD | NO PART NUMBER - CLIPS FOR PLASTIC BUSHINGS FOR WORM GEARS | There is no part number listed in the service manual for theclips which hold the plastic pieces which ride on the worm gears of theelevator assembly. -HQ COMMENTS: The part number for the clips is 4-926-216-00. | ||
| Sony | CDPC900 | NO PART NUMBER - CLIPS FOR PLASTIC BUSHINGS FOR WORM GEARS | There is no part number listed in the service manual for theclips which hold the plastic pieces which ride on the worm gears of theelevator assembly -HQ COMMENTS: The part number for the clips is 4-926-216-00. | ||
| Sony | SPP60 | PART NUMBER INCORRECT - TOP CABINET, BASE UNIT | The part number for the Top Cabinet for the base unit iseither incorrect, or has not been registered in RPC. -HQ COMMENTS: To Tokyo: Is the part number listed correct for the TopCabinet? If not, please inform us of the correct part number. If thepart | ||
| Sony | STRAV850 | NO DISPLAY IN LOWER LEFT CORNER OF DISPLAY | The volume indicator, balance indicator, tremble and bassindicator would not light. However, the subsonic indicator and spectrumdisplays worked. | ||
| Sony | KV20TS30 | RABBIT ANTENNA, 1-501-372-41 SEE FLASH 43 | Rabbit antenna is not listed in the service manual. -HQ COMMENTS: Rabbit antenna is not supplied as accessory for this setit can be ordered separately by Part Number 1-501-372-41Please refer to FLASH # 43 for recommend antennas for various T.V.. | ||
| Sony | CPD1302 | HI V SHUT DOWN WHEN COMPUTER TURNED ON. | Unit would shut down whenever computer connected to it wasturned on. Worked O.K. after powering monitor down and up again. | ||
| Sony | DT3 | INTERMITTENTLY SKIPS OR SHUTS OFF ONLY BP-3 BATT. OPERATION | This unit works properly by AC930 but it skips or shuts offintermittently using BP-3. B+ (4.6V) is unstable. | ||
| Sony | CCDF40 | 41 PIN FLEX CONNECTOR PART NUMBER | Need part number for the 41 pin flexible cable between the(SS-86) board and the (VA-40) board. -HQ COMMENTS: The part number is 1-626-229-11. | ||
| Sony | KV27XBR15 | SAFETY RELATED ADJUSTMENT, REFER TO TVP SB # 62R2 | Per the attached (Safety Related Adjustment) page from theservice manual, we are required to use a regulated power supply adjustablebetween at least, 140 to 145 VDC. Such a supply is not on the SSC re-quired test equipment list nor have I ever encounter | ||
| Sony | CCDF70 | NO AF, ZOOM OR TITLE FUNCTION | Unit had no autofocus, no zoom operation, no title functionand there was a flashing of light in the EVF even when unit was turnedoff. IC-200 on (SS-93) board had no clock. | ||
| Sony | CDP670 | PAUSE MODE WITH 9 OR MORE PROGRAMMED SELECTIONS | When 9 or more selections are programmed, and drawer is openedand closed before pushing play, unit goes into pause after playing lastselection. With 8 or less selections, or with 9 or more without openingand closing drawer before pushing play, unit goes | ||
| Sony | CDXR77 | MAIN BOARD LAYOUT FOR IC-103 IS SHOWN TURNED 90 DEGREES | The board layout for IC-103 on the main board is shown turned90 degrees. It is very easy looking at the board layout to replace thewrong IC. -HQ COMMENTS: The silk screening on the board for IC-301 is off by 90degrees. Tokyo will correct production fo |