| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | HCDD550 | INTERMITTENT SOUND ON ALL MODES - RESOLDER R1200 PWR AMP BD | Unit cuts off and on after a time. Found R1200 on power amplifier board not soldered to board. | ||
| Sony | CDPCX153 | MECHANICAL TICKING WHILE PLAYING CD'S - ADJ HOLDER CLAMP ASY | Ticking noise while playing CD's (intermittant scraping). Thisdoesn't happen all the time sometin=mes the unit could play for an hourbefore the noise is heard. | ||
| Sony | CDPCX153 | NO DISPLAY - BROKEN TACES ON DISPLAY BOARD # 69 | No display. | ||
| Sony | CDPCX153 | DISC IS SCRAPING ON CHUCKING ASSY WHEN PLAYING | The disc may be scarping on chucking assy when playing. | ||
| Sony | CDPCA7ES | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | CDPCA7ES | WILL NOT LOAD, NO PLATTER ROTATION - REPLACED M801 | Units exhibit a variety of loading symptoms. All are dueto the rotary table not turning. Problem is caused by rotary table motor, M801. | ||
| Sony | CDPC90ES | NOT READING CD'S INTERMITTENTLY - REPLACED D601/602 | Unit would not read cd's intermittently, and would damagecd's. Found unit would intermittently not see that there was a disc. Thiswould happen particularly in discs 1,2 & 10. | ||
| Sony | CDPC545 | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | CDPC445 | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | CDPC435 | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | CDPC335 | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | CDPC245 | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | CDPC235 | TRAY MOTOR NOT LABELED OR WIRED CORRECTLY | After replacing the tray motor with a new one the playerwould not work correctly, the tray would rotate back and forth and notrecognize the cd in the unit. | ||
| Sony | XRU220 | KEY SWITCHES FAIL | There seems to be a problem with the volume + switches withall XRU, CDX5180 and CDXU8000 units. I have repaired ten units of variousmodel numbers over the past three months. Some have been returns with thenewly replaced switch broken. Is this a switch | ||
| Sony | CDX51RF | WIRED REMOTE COMMANDER PART NUMBERS NOT IN SERVICE MANUAL | The manual does not show any part numbers for the wiredremote commander supplied with the RF version. Most of the parts areidentical to those found in the CDX-45RF manual, so the technicians orderparts from that manual. But in the case of the front pan |