| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDX51RF | PART INCOMPATIBILITY (RF MODEL): LOWER CASE/SPRING ARM ASSY | Different size pivot point for arm spring assy onCDX51RF/71RF. Lower case for CDX51/71 will not work on RF model armspring assy's. | ||
| Sony | CDX51 | DOES NOT READ DISCS (FOUND RETAINER SCREW HAD FALLEN OUT) | The unit would not read discs. | ||
| Sony | CDX51 | SONGS MAY REPEAT IN SHUFFLE MODE (IT'S NORMAL) | The customer complains that a song may repeat in shuffle modeeven though all of the other songs have not yet been played. | ||
| Sony | CDX51 | ERRATIC OPERATION (FOUND CRACK ON SERVO BOARD NEAR PH11) | The unit exhibited erratic operation. | ||
| Sony | CDX51 | CONTROLLER DISPLAYS E04 (FOUND DEAD SPOT ON SPINDLE MOTOR) | The unit would not read discs. E04 was displayed on thecontroller. | ||
| Sony | CDX51 | INTERMITTENTLY DEAD (FOUND BROKEN SOLDER ON UNILINK CN801) | The unit was intermittently dead. | ||
| Sony | CDX51 | ERROR CODE E99, DISC STUCK IN UNIT (FOUND EV GEAR MIS-TIMED) | The controller displayed E99 one disc was stuck inside of theunit. | ||
| Sony | CDX51 | SKIPS WHEN PLAYING OUTER TRACKS (SEE BULLETIN 358R2 FOR FIX) | The unit skips when playing the outer (higher number) trackson the disc. | ||
| Sony | CDX51 | EJECT BUTTON SEPERATED FROM ESCUTCHEON, CAN'T EJECT MAGAZINE | Escutcheon wears out around the 2 prongs that hold the ejectbutton. This allows the button to become seperated from the escutcheon.This causes the magazine to jam inside the unit because the eject buttondoes not make contact with the eject switch SW951. | ||
| Sony | CDX51 | SKIPS (REPLACED OPTICAL PICKUP) | Skips. | ||
| Sony | CDX5090 | UNEXPLAINED ERROR CODE IN TEST MODE: "E-A0" | An unexplained error code appeared on the display while in thetest mode. The code is E-A0. -HQ COMMENTS: Tokyo told us that program bugs may account forunexplained error codes. In this particular case, the E-A0 appears whenthe unit tried to eject the | ||
| Sony | CDX5090 | ERROR CODE E44 | Servicer has unit that customer complained it dropped out oncein awhile. Servicer has not been able to duplice problem. Put unit intest mode. After 6 hours of playing E44 came up on display but unit kepton playing. Noted FPR 03252. Here's another er | ||
| Sony | CDX5090 | DISCS WOULD LOAD BUT NOT PLAY (REMOVED FOREIGN MATERIAL) | The discs would load but would not play. | ||
| Sony | CDX5090 | FACEPLATE WILL NOT STAY ON (LEVER ON LOCK ASSY WAS BROKEN) | The faceplate would not stay secured to the main unit. | ||
| Sony | CDX5090 | NO DISPLAY ILLUMINATION (REPLACED LAMPS PL801 AND PL802) | There was no illumination for the display. |