Dicas Reparação





Pesquisa:

Resultados 81876

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyCDX4090WON'T LOAD DISCS (FOUND SPRING REF. 103 OUT OF POSITION) The unit would not load discs.
SonyCDX4090WILL NOT READ DISCS (FOUND FOREIGN MATERIAL IN SLED SHAFT) The unit would not read discs.
SonyCDX4090DEAD (FOUND BAD CONNECTIONS ON POWER CONNECTOR CNP501) Unit was dead.
SonyCDX4090SKIPPING, ERRATIC CD OPERATION (SAW BROKEN CONNECTIONS Q520) The unit would skip, and also exhibited erratic operation suchas randomly ejecting discs.
SonyCDX4090WOULD NOT EJECT DISCS (FOUND SERVO MCB SCREW JAMMING MECH) The unit loaded and played the disc, and the disc stoppedplaying when the eject button was pressed, but the unit would not ejectthe disc.
SonyCDX4090WILL NOT ACCEPT DISCS (FOUND D523 AND Q520 DEFECTICE) The unit would not accept discs.
SonyCDX4090WON'T PLAY DISCS (FOUND BROKEN DAMPER SHAFT) The unit would not play discs.
SonyCDX4090SOME FUNCTION KEYS NOT WORKING PROPERLY (FOUND OPEN TRACE) Some function keys were not working correctly.
SonyCDX4090NO DISPLAY OR ILLUMINATION (FOUND Q511 DEFECTIVE) The unit had no display and no illumination. SOLUTION: Replacing Q511, p/n 8-729-903-46 restored normal operation.
SonyCDX4090POOR TUNER RECEPTION (REPLACED TUNER PACK TU1) The unit had poor tuner reception.
SonyCDX4090INTERMITTENTLY WON'T READ TOC (FOUND LIMIT SWITCH DEFECTIVE) The unit would intermittently not read the discs.
SonyCDX4090DISCS WON'T LOAD/EJECT (FOUND SLIDER REF. 124 BROKEN) Unit will not load or eject discs.
SonyCDX4090CD NOT WORKING (FOUND ST LEVER REF 136 OUT OF PLACE) CD section not working.
SonyCDX4090SKIPS (FOUND RV1 AND RV2 NEEDED ADJUSTMENT; OPTICS WERE OK) Unit skipping.
SonyCDX4090NO CD FUNCTIONS, TUNER WORKS OK (FOUND Q520 AND D523 BAD) Radio works, CD does not work.



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads