Dicas Reparação





Pesquisa:

Resultados 81876

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonySLV780HFDISTORTED PIX - RESOLDER PIN 1 OF IC201 (SYS CON) distorted pix on pre-recorded tapes and tapes recorded in unit. Found heads not switching. No RF sweep. Found IC201 pin 1 not soldered.
SonySLV780HFWON'T EJECT TAPE - REALIGN MAIN BRAKE ASSY (S) #210, 211 Won't eject tape.
SonySLV780HFWON'T ACCEPT TAPE - REALIGN FL BLOCK ASSY PINS ON LEFT SIDE Won't accept tape.
SonySLV780HFPIX SHAKES ON PB - ALIGN TAPE PATH Pix shakes on playback
SonySLV780HFDEAD - REPLACE CP101 POWER BLOCK Dead.
SonySLV780HFWON'T ACCEPT TAPE -REPLAC IC071(MA214 BRD)-CAM/LOAD MOT DRIV Won't accept tape
SonySLV740HFNO EJECT - CASS DOOR LEVER MISALIGNED Tape will not eject. Found cassette door lever is misaligned. Door lever is located on left side of Fl block assy.
SonySLV720HFINTERMITTENT COLOR RECORDING - COLD SOLDER ON X101(VI127 BD) Intermittent black and white recording (no color)
SonySLV720HFWON'T LOAD - REPLACE PS450(SEMICONDUCTOR FUSE ON FV LINE) Unit not loading the tape. Found no 5v at the leading loading terminal
SonySLV640HFNO DISPLAY ALL OTHER FUNCTIONS OPERATE - REPLACE CP102 CONV No display. Power led lights and all other functions work.
SonySLV640HFNEED EXTENSION CABLES TO WORK ON HI-5 DISPLAY PCB When you have a display problem, you cannot easily get to the back side of this pcb to measure around IC302. Could we get extensions for CN904 and 905. If not, this is how we worked on unit: Disconnected two cab
SonySLV575UCSOUND WORBLED,AUTO TRACKIN BLINKS - REPLACE TENSION BRAKE Auto tracking light keeps blinking sound is warbled.
SonyKV32XBR35DEAD SET, REPLACED D1409 Set dead, relay would click on and off.Unplugging connector G5 on G bd caused tv to begin playing.SOLUTION: Replaced shorted D1409 on audio B+ line. HQ COMMENTS: Located off of IC1401/pin 9 on the A Board.
SonyKV32S15RELAY PULSATES ON AND OFF, REPLACED PM501 Relay RY602 pulsating on and off continuously.
SonyKV27XBR95SSCROLLING BAR DISTORTION, RESOLDERED C529 Screen distorted horizontal lines scrolling, can see throughbars. SOLUTION: C529 loose resoldered all ok. HQ COMMENTS: Located off of IC503/pin 2 on the A Board. Couples the Hpulse to the Pin correction circuit.



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads