Dicas Reparação





Pesquisa:

Resultados 81877

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyITA100DISTORTED PRPOGRAM OR DIAL TONE - REPLACE Q102 AND D113 Distorted program or dial tone. Found Q102 and D113 defective.
SonyITA100NO ANSWERING MACHINE FUNCTION, NO AUDIO - REPLACE IC308 No answering machine function and no audio. Found IC308/pin 17output defective.
SonyITA100LOW AUDIO ON TIME STAMP OUT LINE - REPLACE IC308 Low audio from the time stamp through the speaker and out theline.
SonyITA100NO POWER - REPLACE IC303, P/N 8-759-267-52 No power. Micro IC303 defective temperature higher thannormal
SonyITA100NO POWER - REPLACE IC304, P/N 8-759-260-72 No power. Found voltage detect IC304 shorted.
SonyITA100NO ILLUMINATION ON POWER LED - RESEAT CONNECTOR CN301 No illumination of power led LD502. CN301 connector was loose.
SonyITA100INTERMITTENT TELEPHONE LINE SEIZURE - RESEAT HSW101 Intermittent telephone line seizure. Found Hook switch HSW101intermittent.
SonyITA100NO ANSWERING MACHINE FUNCTION, DEFECTIVE TIME STAMP Cracked traced at DC in jack J301 (-) to JP488.
SonyITA100NO ERASE - REMOVE SOLDER SHORT ON ERASE HEAD HRPE301 Unit would not erase messages. Found solder short to groundonto erase head HRPE301.
SonyITA100DAMAGED BUTTONS - RESEAT RUBBER KEY SWITCH (REF 8) Rubber key switch was misaligned. -SOLUTION Reseated rubber key switch.
SonyITA100DEFECTIVE RECEIVER - REPLACE HANDSET No dial tone heard in handset, mic is ok, found speaker insidereceiver defective, measured open.
SonyITA100INTERMITTENT MECHANICAL MOTION - RESOLDER MOTOR M301 Intermittent mechanical motion. Found cold solder on motor(whitewire) M301.
SonyITA100NO RECORD (ICM, CONV, AND MEMO) - RESOLDER HRPE301 Unit would not record. Found white wire on the tape head(HRPE301) cold soldered.
SonyITA100NO ERASE - REPLACE HEAD HRPE301, P/N 1-500-123-11 Unit would not erase. Found head HRPE301 open.
SonyITA100UNIT PLAYS FAST - REPLACE DECK MECH (REF 51), P/N 155097911 In the play mode, the head, record playback was notfunctioning properly (it stuck).



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads