| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDTR70 | TAPE STUCK IN UNIT/ REPLACE CASSETTE HOLDER ASSY | Tape stuck in unit. | ||
| Sony | CCDTR70 | HORIZONTAL LINES IN VIDEO/REPOSITION ARM ASSY REF 780 | Horizontal lines in picture. | ||
| Sony | CCDTR400 | POOR FOCUS/ADJUST FLANGE BACK | Poor focus. | ||
| Sony | CCDTR400 | TAPE STUCK, NO FUNCTIONS, BEEPS WHEN TURNED ON/MODE SWITCH | Tape stuck, no functions, beeps when turned on. | ||
| Sony | CCDTR400 | WILL NOT LOAD TAPE/RE-SEAT S REEL TABLE | S Reel table stuck, re-seated reel in proper position. | ||
| Sony | CCDTR30 | NO COLOR IN CAMERA MODE/RESOLDER CONNECTION OF Q704 | No color in camera mode. Found collector of Q704 was notsoldered. | ||
| Sony | CCDTR30 | NO AUDIO RECORD, LOW PLAY/REPLACE IC601 | No audio record, low play. | ||
| Sony | CCDFX730V | SPEAKER INOPERABLE/RESOLDER J903 | No sound from speaker. Sound present from line out. Putunit in pb mode. Traced audio from DD71 (CN901 pin 4) thru SD14 back intoDD71 (CN902 pin 8) and found no audio coming out (CN902 pin 2). Audiocomes thru J903 (earphone jack) of which one termina | ||
| Sony | CCDFX310 | STRANGE INTERMITTENT MECHANICAL PROBLEMS/REPLACE CAPSTAN MOT | Unit would intermittently not load tape in or out, or capstanwould run away, false tape in or out. -SOLUTION :Replace capstan. | ||
| Sony | CCDFX230 | LINE IN VIEWFINDER/RESOLDER CONNECTION ON IC501 | Line in viewfinder. | ||
| Sony | CCDFX230 | NO EJECT/ADJUST GEAR PHASE REF 870 & REF 869 | No Eject. | ||
| Sony | CCDF77 | NO DRUM ROTATION - C513 LEAKS | C513 leaks electrolyte on to the board, damaging feed-thru topin 12 of IC503. | ||
| Sony | CCDF70 | DRUM WILL NOT START/REPLACE C068, SS-92 BOARD | Drum wil not start, only twitches, found cap C068 bad, capkit A7190071A. | ||
| Sony | WMF45 | NO POWER IN TAPE MODE - REPLACE C403, P/N 1-126-154-11 | No power in tape mode. | ||
| Sony | WMF2078 | NO SOUND - REMOVE EXCESS SOLDER FROM MAIN BOARD | No sound from tape, am or fm. Excess solder onto power switchS301 was causing B+ amp transistor Q302 to blow. |