| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | KV27HSR10 | ANODE CONNECTOR MISSING, REPLACE FLYBACK | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please disregard the flyback that might come on the re-placement board. Reinstall either a new flyback or the one from the oldboard. | ||
| Sony | KV27XBR65 | ANODE CONNECTOR MISSING ON NEW "A" BOARDS, SEE SB 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32, which is the AnodeCable. This was covered in Service Bulletin number 108. Future A Boardswill co | ||
| Sony | KV27XBR60 | ANODE CONNECTOR MISSING, P/N 1-540-032-32, SB 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMNETS: Please order the Anode Cable, Part Number 1-540-032-32.This has been covered by Service Bulletin number 108. Future boards willbe suppl | ||
| Sony | KV27XBR50 | ANODE CONNECTOR MISSING FROM NEW "A" BOARDS, REPLACE FBT | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please disregard the flyback that might come on the re-placement board. Reinstall either a new flyback or the one from the oldboard. | ||
| Sony | KV27XBR15 | ANODE CONNECTOR P/N MISSING, 1-540-006-32 SEE S/B 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is theAnode Cable. This was covered in Service Bulletin number 108. FutureBoards will come w | ||
| Sony | KV27XBR10 | ANODE CONNECTOR MISSING, P/N 1-540-006-32 SEE SB 108 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is the AnodeCable. Future Boards will have the cable with the board. Service Bulletinnumber | ||
| Sony | KV32HSR10 | ANODE CONNECTOR MISSING FROM "A" BOARD, 1-540-006-32 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is the AnodeCable. Future Boards will come with this Cable. | ||
| Sony | KV32XBR70 | ANODE CONNECTOR MISSING, 1-540-006-32 | When replacing the A board, the anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order the Anode Cable, part number 1-540-006-32.Future boards will come with the anode Cable. | ||
| Sony | KV32XBR65 | P/N FOR ANODE CONNECTOR MISSING, 1-540-006-32 | When replacing the A Board, the wire from the flyback ismissing. Is there a part number for it? -HQ COMMENTS: Please order Part Number 1-540-006-32, which isthe Anode Cable. Future boards will come with this Board. | ||
| Sony | KV32XBR15 | ANODE CONNECTOR MISSING, 1-540-006-32 | When replacing the A Board, the Anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which isthe Anode Cable. Future boards will have the cable with the board. | ||
| Sony | KV32XBR15 | SET IN-OPERATIVE, REPLACED IC-651, AND Q604 | Unit is inoperative. IC-651 was found defective. | ||
| Sony | SLV575UC | POOR OR DISTORTED EP PLAYBACK | Unit plays back EP recordings very noisy or distorted. SPrecordings playback ok. | ||
| Sony | KV32XBR10 | ANODE CONNECTOR MISSING, 1-540-006-32 | When replacing the A board, the Anode wire from the flyback ismissing. Is there a part number for it? -HQ COMMENTS: Please order part number 1-540-006-32 which is the AnodeCable. Future boards will come with the cable. | ||
| Sony | KV32XBR50 | ANODE CONNECTOR MISSING, P/N 1-540-006-32 | When replacing the A Board, the Anode wire from the flybackis missing. Is there a part number for it? -HQ COMMENTS: Please order the Anode Cable, Part Number 1-540-006-32.This cable will come with future boards. | ||
| Sony | WMF2031 | WRONG PART NUMBER IN SERVICE MANUAL FOR IC-1 | The P/N in the S/M (8-752-908-89) is incorrect for IC-1. |