Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CCDF33 | PART NUMBER FOR AUTOFOCUS MOTOR AND IRIS MOTOR | Servicer called and requested availability and part number forautofocus motor. Part number and reference is not listed in servicemanual. Is this part going to be available separately? -HQ COMMENTS: The part number of the focus motor is 3-707-561-01. | ||
Sony | SLV272UC | J-6082-050-A MODE BOX ADAPTER | Servicer has purchased this mode box from Sanyo for use onP-88 chassis. Servicer would like to purchase VHJ0050/70 adapter fromSony. Can we get this adapter separately? Please advise and supply partnumber if it will be available. -TO TOKYO: Can you p | ||
Sony | CCDTR5 | NO COLOR ON RECORDING | Shows color and other video information in video out but nocolor recorded on tape. Vectorscope shows circle and waveform monitoris missing the color burst. | ||
Sony | WMF2081 | AVAILABILITY OF LCD ASSY WHICH INCLUDES FLEX CABLE | The LCD display (Ref#E701), and it's connector (Ref# 904) areavailable as separate items. However, there is no way to connect the LCDto it's connector manually. -HQ COMMENTS: Tokyo fax (#A900509): The Synthesizer PCB, which includesthe Flex cable and t | ||
Sony | WMAF65 | AVAILABILITY OF LCD ASSY WHICH INCLUDES FLEX CABLE | The LCD display (Ref#E701), and it's connector (Ref#905) areavailable as separate items. However, there is no way to connect the LCDto it's connector manually. -HQ COMMENTS: Tokyo fax (#A900509): The Synthesizer PCB, which includesthe Flex cable and th | ||
Sony | WMAF62 | AVAILABILITY OF LCD ASSY WHICH INCLUDES FLEX CABLE | The LCD display (Ref#E701), and it's connector (Ref#905) areavailable as separate items. However, there is no way to connect the LCDto it's connector manually. -HQ COMMENTS: Tokyo fax (#A900509): The Synthesizer PCB, which includesthe Flex cable and th | ||
Sony | EVS1 | TRACKING IS OFF/OR EATS TAPES-WRINKLES TAPES | Customer complains about lines in picture, off tracking oreats tapes. | ||
Sony | XR5500 | HANDLE COMING OFF WHEN CUSTOMER REMOVES UNIT FROM BRACKET | District office CIC has received three customer complaints dueto the handle coming off their removable car stereo unit as they pull fromthe bracket. Will attempt to get a sample. This part is used in severalmodels. -HQ COMMENTS: Tokyo has been made aw | ||
Sony | KV27HFR | DEAD, REPLACE R-664 ON "G" BOARD | Resistor R-664 (base of Q-655) had increased in valueaffecting the bias of Q-655. As a result, unit did not start up. | ||
Sony | KV32XBR50 | NOISE WHILE CHANGING CHANNELS, NORMAL NO MUTE ON AUDIO AMP | When changing channels, you will hear a slight noise such as,thump, thump. You hear this even if set is in mute mode. I have alsoheard this in a new KV-27XBR50. It seems inherent in this new model. -HQ COMMENTS: What you are hearing is the audio ampl | ||
Sony | SLHF360 | WILL NOT LOAD/EJECT | I have found two units with the same problem. One of the twoleads soldered to the terminals of the loading motor breaks off due to themovement and play of the motor. | ||
Sony | KV13TR20 | INTERMITTENT LOSS OF PICTURE,RESOLDERED VHF TUNER | Set will work and start to fade in and out and loss signal. | ||
Sony | CCDTR5 | RECORDS DRUM MOTOR NOISE | Records motor noise. Cylinder motor Ref. No. 320 on page 217(part number A-704-820-2A) is noisy when compared to other TR5s. Havereplaced cylinder motor and (VS-22) part number A-706-194-1A. The problemstill exists. -HQ COMMENTS: Please replace the m | ||
Sony | CDP370 | DOES NOT WORK WITH REMOTE PROPERLY | Does not work with remote control, or intermittent remoteoperation. Not taking commands properly. Remote commander checks ok. | ||
Sony | STRAV710 | NO SYSTEM POWER | Power relay RY-901 will not turn on. Solder joints at legs ofQ-911 look discolored by excessive heat. |