Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KV25XBR | ERRATIC POWER ON FUNCTION | The unit would turn on after pushing power switch severaltimes manually or remote. Found R653/R660 on GA board increased to1 meg ohms. These are carbon resistors. | ||
Sony | CCDV1 | NO TIME OR DATE RECORDING ON TAPE | Unit would not record date or time information on tape. Unitwould display date and time on CCD display and data indicator in view-finder would function normally. | ||
Sony | CFSDW60 | WRONG HEAD | Please note enclosed samples, we need the correct REC/PB headfor deck A. The stocked part is incorrect. Please advise. -HQ COMMENTS: Correct P/N is 1-543-406-11. We will issue a S/B. | ||
Sony | SL2410 | NO CAPSTAN SERVO | The capstan servo on these units would not lock up. Thecustomer tracking control POT was found to be open. The servo freq. wasclose but not locked. | ||
Sony | KV1981R | SHUT DOWN, REPLACED OPEN Q502 AND SHORTED C553 | No picture, then unit shuts off. | ||
Sony | CDXA10 | CAR STEREO SERVICE BULLETIN #73 (CDXA10 DISC PACK) | Disc pack can be safely and easily removed in 5 secs followingmy procedure rather than following S/B #73 (car stereo). Use a flatobject (I use a straightened stainless steel clasp senior - made in Japan.This clasp can be obtained at any stationery store | ||
Sony | SLHF900 | POPPING NOISE IN HI-FI SOUND | Audio popping. S/B #210 improved problem, but did noteliminate it. -HQ COMMENTS: Have servicer confirm that resistor and cap wereincreased to max specified value. | ||
Sony | XR510R | NO PLAYBACK, NO AMS | No B+ to IC301. Q329 was cold soldered (factory) on all legs. | ||
Sony | CCDV5 | CLOGGED HEADS | Distorted picture. | ||
Sony | STRAV780 | NO STEREO RECEPTION, SEARCHES BUT DOES NOT FIND STATIONS | 1) Manual tuning worked OK except for no stereo indicator.2) When performing search, indicator moved on spectrum display screen, butno station markers were placed on it. | ||
Sony | KV2075R | WEAK SOUND, REPLACE Q1404 | Audio is weak on full volume. | ||
Sony | SLHF1000 | TAPE PATH | Customer had bought 2 identical machines. Could not playtape recorded on machine #1 or machine #2 and vice versa. Picture wouldbreak-up. | ||
Sony | DT3 | THE TURNTABLE DOES NOT SPIN | 8.6V appear at the collector of Q401 when only 4.5V should bepresent. Q401 is found to be shorted. Many DT-3 or D3 units have thesame problem. | ||
Sony | SL2000 | SUBSTITUTE PINCH ROLLER | When this new substitute part pinch roller X-3669-307-6 isinstalled, the adjustment of the pinch closing limitter (Step 3-11 Page3-11) cannot be made to fall within the spec. This will cause a veryintermittent jamming of the pinch roller. | ||
Sony | SLHF900 | P/N FOR CIRCUIT BOARD HOLDER IS MISSING | Part number for circuit board holder is missing from manual(see attached). A similar part used in the SL-HF1000 is listed in theS/M. -HQ COMMENTS: The board holder is unavailable. However, we havereceived a few sample from Tokyo. |