Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KV2649RX | PLUG SET PRODUCES A PULSING SOUND THROUGH SPEAKERS, Q604 | Plug set in master power switch on set produces a pulsingsound through speakers. When power switch is pressed set comes on withnormal picture and a slight hum in audio. | ||
Sony | CFSW400 | MISSING PART NUMBER | No part number listed for front cabinet #10 on page 25 ofS/M. -HQ COMMENTS: The part number for the front panel (Ref. #10) isX-3327-907-1 silver and X-3327-908-1 black. A S/B has been issued. | ||
Sony | TCM10 | PART NUMBER | Item number 28 page 30 of S/M for TCM-10 lists the partnumber for the stopper washer as 9-910-999-34. This is a no longeravailable number. -HQ COMMENTS: This washer should be P/N 3-315-384-11. | ||
Sony | SL20 | PART NUMBER FOR BLACK TUNER PRESET LID | Ordered a black preset lid for an SL-20 (P/N 3-684-177-01) butreceived a silver lid. Tried ordering part number for other units withblack lids but experienced same problem. -HQ COMMENTS: Two known good numbers are X-3684-146-1 for a black lidwith red S | ||
Sony | KV1976R | NO VIDEO, REPLACE IC301 | No video, audio has power. | ||
Sony | CDP302 | ALIGNMENT PROBLEM | Skipping-changed BU-1A will not read TOC RF PLL alignmentgood, but not stable changed IC305 no change. | ||
Sony | TCFX4 | PART # FOR SWITCH ASSY | I need the part number for the switch assy S801-S807.These are the function switches. -HQ COMMENTS: Function button assy is Ref. #65 on page 31 of the S/M.P/N is A-2145-043-A. | ||
Sony | CDP30 | LENS CHANGE, SEE SERVICE BULLETIN # 0310 | Production change. This unit has new type optical assy KSS-120C (P/N X-4910-441-1). There is no supplement or S/B on this change onCDP-30. CDP-70 has a supplement to the S/M describing changes. Svcr.states that there are some changes to PC board also | ||
Sony | SLHFR70 | PART NUMBER | What is the part number of PS2.6x4 screw and the spring pin2.5x16 on page 88 of the S/M. -HQ COMMENTS: The P/N of the screw is in the Hardware List on page 92(7-628-235-95). The pin is not available. However, a 2.5x14 pin shouldwork (P/N 7-626-302-31) | ||
Sony | BMC550 | DISTORTION IN UPPER AND LOWER PORTION OF PICTURE | Upper and lower portion of picture was distorted only duringa short period of time after standby to REC or REC PAUSE to REC. Afterthis point, playback picture appears normal. | ||
Sony | BMC110 | UNIT DEAD, NO POWER UP | Unit was completely dead, no operation. Found u-comp of SS-17board (IC301) Pin 38 (Reset) always remains low. | ||
Sony | KV25DXR | INTERMITTENT HORIZONTAL SQUEAL | This unit has an intermittent horizontal squeal. | ||
Sony | KV1993R | THE AUX WOULD COME ON IN FRONT OF THE CHANNEL NUMBER | This set displayed the same symptom as the KV-1970R. The AUXwould come on in front of the channel number. This model number is notlisted on the Bulletin. | ||
Sony | CDX5 | PROTECTOR PLATE AND FRAME PART # | The original frame has notches in the side so the protectorkit 3-323-287-01 can be snapped on. The replacement frame part does nothave these notches. | ||
Sony | ALL CAM | NO 80 PIN IC REMOVER & NO PART NUMBER | Video equipment now has 80 pin flat pack IC |