Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CRF320 | NO SW RECEPTION | I had no SW. Touching Q212 caused intermittent SW. | ||
Sony | CCDV8AF | NO VIDEO | No video on playback or recording, audio in the unit wasfine. | ||
Sony | CCDV8AF | AUTO FOCUS | The auto focus motor was rotating in one direction only. | ||
Sony | CFSW30 | INCORRECT PART NUMBER FOR MOTOR (M902) | M901 and M902 are different. One is CW rotation, other CCW.The part numbers are the same in the manual. When ordering we get theCW motor. Can you help us with the correct part number for the CCW motor? -HQ COMMENTS: Part number is A-3133-229-A for M9 | ||
Sony | SLHF300 | NO CHANNEL READ OUT | When input selector on (tuner), have video and sound but nochannel read out and cannot change channels. When in line/pcm position,channel select lights and can change channels but no tuner video or sound. | ||
Sony | KV2781R | POOR PURITY, REPLACE CRT | Pink in upper right hand corner. Could not adjust purityin upper right hand corner, tried using magnets, no help. I hit the CRTwith my hand and could see shift in purity. | ||
Sony | SLHFR70 | NO CHANNELS PROGRAMMING | Will not remember programmed channels on the tuner. | ||
Sony | TCU270 | INTERFACE INFO | Please send us interface info. -HQ COMMENTS: The TCU-270 is tape deck in the access 301 A/V entertain-ment system. TCU-270s 13 pin connector only connects to the AVU-270.AVU-270 supplies AC power using the 13 pin connector. Also, all of thesignals are | ||
Sony | CDP302 | NO DISC ROTATION - ABNORMAL FOCUS SEARCH | During focus search objective lens goes too far to eitherextreme. FOK 0. At C206 broken PCB trace. | ||
Sony | CFD5 | TRANSPORT GOES BACK AND FORTH | Intermittently, the transport goes back and forth. At times,unit will play fine for 5-6 hrs then problem occurs. -HQ COMMENTS: Please refer to Tape Recorder S/B #146R and try new FWDand NR levers. | ||
Sony | CDP502ES | OSCILLATION PRESENT AT EFM | Cannot adjust PLL-RF due to the fact there is oscillationpresent at EFM. The oscillation looks similar to the EFM signal but itis much higher in frequency. IC604, IC601, D601, T701 and complete RFPCB all were replaced. Problem still exists. -HQ COMME | ||
Sony | SL2400 | NO MOTION | The machine came in first time with open pinch solenoid. Ireplaced it, also replaced driving transistors. Now came as a recall,pinch and brake solenoids are open. Replaced again, also driving tran-sistors. Intermittently the machine changes the funct | ||
Sony | CCDV8AFU | VERTICAL BARS ON PLAYBACK | Vertical bars on playback caused by creases on the tape.Customer thinks the unit is damaging his tapes. Verified creases on allsize tapes. | ||
Sony | WMF10II | WHEEL BLOCK ASSY, MOTOR (SUBSTITUTION) | This part subs to X-3315-357-1 (WM-F10) but the shaft in thewheel block is too long for the WM-F10II motor. -HQ COMMENTS: Refer to T/N Letter A0053. Use P/N A-3313-205-A for themotor wheel block assembly. However, the new motor wheel is notcompatible | ||
Sony | STRAV760 | NO SIRCS OUT SIGNAL | No output at SIRCS out connector. |