Prezado Zurca. realizei os testes...
[METER AGING TEST MODE]
• This mode use in factory to perform the non-stop aging mode for
meter device.
Procedure:
1. Press [POWER] button to turn on the system.
2. Press [EQ BAND/MEMORY] button and [METER MODE]
button simultaneously.
[ERROR MESSAGE]
1. METER ERROR CODE CHECK
• This mode is used to check the number of trigger for Meter Pointer
to initial switch and end switch. The switches will trigger during
meter initialize in AC supply on condition.
Procedure:
1. Press [POWER] button to turn on the system.
2. Press [x] button, [EQ BAND/MEMORY] button and [METER
MODE] button simultaneously.
The Meter Error Code will appear on the fl uorescent indicator
tube displays
• Display
Display on fl uorescent indicator tube,
IxxxxxMyyyyy
Ixxxxx = total number of Initial Switch touch by Meter
pointer. The Initial Switch will touch twice during meter
initialized process.
Myyyyy = total number of End Switch touch by Meter
pointer. The End Switch will touch one times during meter
initialized process.
No primeiro procedimento somente aparece no visor (MTR AGING) e não acontece mais nada.
No Segundo procedimento ele abre uma contagem com a Letra i no começo e alguns números e M depois outros números (IxxxxxMyyyyy). a contagem vai seguindo aumentando os números...
Segue link da foto da contagem...
www74.zippyshare.com/v/uo1auIc1/file.html