| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Philips | L9H.2E | Sets do not work properly with CANAL+ decoder. | Sets do not work properly with CANAL+ decoder connected to the scart connector(sound and picture are not de-scrambled). Replace the micro-computer item 7600 with an execution with software version 1.5 or higher. The codenumbers for the micro-computers | ||
| Philips | L9H.2E | Set does not work. | Replace the EPS panel or replace the diode itemCR2 on the EPS panel by type ER302-0141. Service code diode, type ER302-0141, is 9965 000 06628. Remarks: The EPS panel is a non repairable item. Only for this case, diode with item CR2 is supplied. In | ||
| Philips | L9H.2E | Service code of the FM-Radio tuner. | In the partslist of the Radio-SP/LS-Vbatt panel of the Chassis Manual L9H.2E, the service code of the FM-Radio tuner item 1901 was not indicated. The service code is 9352 632 70112 | ||
| Philips | L9H.2E | Ohm/Watt external bathroom speaker | Ohm/Watt external bathroom speaker ================================== ITV sets with above mentioned chassis are equiped with an external loudspeaker connection. To this connection a bathroom speaker can be connected. If an external loudspeaker is con | ||
| Philips | L9H.2E | Correction to service Manual of L9H.1A, L9H.2A, L9H.1E, L9H.2E | In the chassis manual, the service code of the so called "set-up" remote control type RG4172BK (also named T374AH) was not mentioned. The service code is 3135 017 02641 | ||
| Philips | L9H.2E | "welcome message" doesn't come up at start up. | When the set is switched off via the mains switch and is switched on again after more than 5 minutes, the "welcome message" doesn't come up at start up. Put the set into the SDM mode. Select the option AS (Auto start-up). Change the option content fr | ||
| Philips | L9H.2A | Correction to service Manual of L9H.1A, L9H.2A, L9H.1E, L9H.2E | In the chassis manual, the service code of the so called "set-up" remote control type RG4172BK (also named T374AH) was not mentioned. The service code is 3135 017 02641 | ||
| Philips | L9H.1E AA | Correction to service manual L9H1.E AA | In the parts list of the service manual only the service code of the complete Clock Panel is mentioned. Below also the service codes of the separate components are listed. 1072 3119 108 51881 Clock panel complete (large LED's) DP1 4822 265 30734 Co | ||
| Philips | L9H.1E AA | ComPair/Searchman | In the service manuals of above mentioned Chassis on page 14 paragraph 5.7 the ComPair tool is explained. However the ComPair/Searchman user software is not available. | ||
| Philips | L9H.1E | Set does not work. | Replace the EPS panel or replace the diode itemCR2 on the EPS panel by type ER302-0141. Service code diode, type ER302-0141, is 9965 000 06628. Remarks: The EPS panel is a non repairable item. Only for this case, diode with item CR2 is supplied. In | ||
| Philips | L9H.1E | Ohm/Watt external bathroom speaker | Ohm/Watt external bathroom speaker ================================== ITV sets with above mentioned chassis are equiped with an external loudspeaker connection. To this connection a bathroom speaker can be connected. If an external loudspeaker is con | ||
| Philips | L9H.1E | Ohm/Watt external bathroom speaker | Ohm/Watt external bathroom speaker ================================== ITV sets with above mentioned chassis are equiped with an external loudspeaker connection. To this connection a bathroom speaker can be connected. If an external loudspeaker is con | ||
| Philips | L9H.1E | Correction to service Manual of L9H.1A, L9H.2A, L9H.1E, L9H.2E | In the chassis manual, the service code of the so called "set-up" remote control type RG4172BK (also named T374AH) was not mentioned. The service code is 3135 017 02641 | ||
| Philips | L9H.1A | Correction to service Manual of L9H.1A, L9H.2A, L9H.1E, L9H.2E | In the chassis manual, the service code of the so called "set-up" remote control type RG4172BK (also named T374AH) was not mentioned. The service code is 3135 017 02641 | ||
| Philips | L9.3E | Front clock doesn't raise to the good time. | Cause : Too high sensitivity of clock IC1. Change the resistor R3632 on Side Interface Panel code number 3139 178 59671 from 68K code number 4822 051 20683 into 22K code number 4822 051 20223. IRIS CODE : 1171 |