| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | MDP700 | PART NUMBERS FOR SERVO CHECKER CABLES | There are no part numbers available for the LD and CD checkercables in the service manuals. -HQ COMMENTS: Part number for the LD cable is J-6080-880-A. Part numberfor the CD checker cable is J-6080-922-A. Both parts are available in KC.The old servo c | ||
| Sony | MDP200 | PART NUMBERS FOR SERVO CHECKER CABLES | There are no part numbers for the LD and CD checker cables inthe service manual. -HQ COMMENTS: Part number for the LD cable is J-6080-880-A. Part numberfor the CD checker cable is J-6080-922-A. Both parts are available in KC.The jigs are no longer nee | ||
| Sony | KV32XBR15 | INTERMITTENT HORIZONTAL SHIFT TO RIGHT, RE-SOLDERED IC-582 | Intermittent picture is shifted to the right - no color anddark. When you turn the set on and off, unit will work ok. | ||
| Sony | KV2090R | RASTER WITH DISTORTED SOUND, RESOLDER A-1 CONNECTOR | Distorted sound, no picture, no snow plain raster only. | ||
| Sony | CCDV9 | DEAD UNIT | Unit dead and no display. When lithium battery is taken out,display comes on. When its put back in, the unit dies again. | ||
| Sony | CDX7580 | ILLUMINATION WEAK/WON'T SWITCH COLORS | Display won't switch color or display is dim. | ||
| Sony | SLV575UC | TIMER RECORD LOCK UP | Customer sets up timer Record program 1 to start at (forexample) 8:00 A.M. Switch-off at 8:30 A.M. Program 2 starts 9:00 A.M.switch-off 9:30 A.M. At 8:00 A.M. unit starts to record, but powerfailure occurs at 8:10 A.M. Power returns at 8:40 A.M. cus | ||
| Sony | CDPC305 | STATIC IN OUTPUT WHEN UNIT HAS WARMED UP | Static in output which increases as the unit (IC) heats up.This is the second encounter of this type in recent weeks. | ||
| Sony | ACV30 | AVAILABILITY OF CH BOARD | Reference FPR #LO244. The disclaimer no authorizationrequired has not yet been attached to part no. A-4925-307-A in thecomputer so our parts distributors are still rejecting orders for thispart. -HQ COMMENTS: All semiconductors are now available for the | ||
| Sony | D4 | DEFECTIVE PART - UPPER LID ASSEMBLY | When replacing upper lid assembly, I found the magnet in thechuck plate assembly on the wrong side. There was no magnetic chucking tospindle motor. | ||
| Sony | SPP150 | NO ACTIVATION DURING BATTERY SAVE | Unit works in normal mode but will not activate channelscanning in BATT SAVE mode. | ||
| Sony | SPP110 | NO ACTIVATION DURING BATTERY SAVE | Unit works in normal mode but will not activate channelscanning in BATT SAVE mode. | ||
| Sony | SPP300 | HANDSET DOES NOT COMMUNICATE WITH BASE | Cordless handset had low B+ to PLL. Only 1.2 volts on Q-210collector. | ||
| Sony | SPP100 | HANDSET DOES NOT COMMUNICATE WITH BASE | Cordless handset had low B+ to PLL. Only 1.2 volts on Q-210collector. | ||
| Sony | KV27XBR50 | NO SOUND ON FRONT CHANNEL, REPLACED IC2451 AND PS-2401 | No sound on front channel. |