| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDTRV30 | HE-20 PCB IS MISSING ALL COMPONENTS / NORMAL ON CCD-TRV30/40 | Missing components HE-20 | ||
| Sony | CCDTR93 | NO FUNCTION AT ALL; NO EVF / RESOLDER CN504 ON THE VS125 BD | You hear a beep when changing from VTR mode to camera mode,but no function at all and no EVF. Found bad CN504 on VS125 board. -SOLUTION :Resolder CN504 on VS125.- HQ Comments: CN504 is the connector between the DC to DC converter andthe VS bd. No volt | ||
| Sony | CCDTR93 | NO EJECT/ DRUM RAMPS UP/ REPLACE X502 OFF OF IC505 | When powering up unit will spin the drum and stop. No otherfunctions work. After resoldering IC505 same problem. Isolated problemon servo board VC125, and found X502 not oscillating. | ||
| Sony | CCDTR91 | NO E -E CAMERA MODE WOULD COME ON / RESOLDER-REINSTALL L651 | Camera section would come on, blink, but no pix thru V/F orvideo out. | ||
| Sony | CCDTR91 | NO EJECT CAUTION MODE / BAD LOADING MOTOR BLEW PS501 (VS-99) | Unit cannot eject tape and it is in caution mode. VTR/camerais on. | ||
| Sony | CCDTR83 | NO FUNCTION AT ALL; NO EVF / RESOLDER CN504 ON THE VS125 BD | You hear a beep when changing from VTR mode to camera mode,but no function at all and no EVF. Found bad CN504 on VS125 board. -SOLUTION :Resolder CN504 on VS125.- HQ Comments: CN504 is the connector between the DC to DC converter andthe VS bd. No volt | ||
| Sony | CCDTR81 | IN VTR VIDEO WOULD BLANK OUT/ Q438 OPEN | When playing back a tape the video would go to black screen.Was missing sync, burst and composite video, -SOLUTION :Found Q438 opened up when circuit warmed up. | ||
| Sony | CCDTR80 | UNIT PLAYS WITH NO TAPE INSIDE / RPL PS500 | Unit goes into play with no tape inside also does not sensereel rotation. Found PS500 open | ||
| Sony | CCDTR73 | NO FUNCTION AT ALL; NO EVF / RESOLDER CN504 ON THE VS125 BD | You hear a beep when changing from VTR mode to camera mode,but no function at all and no EVF. Found bad CN504 on VS125 board. -SOLUTION :Resolder CN504 on VS125.- HQ Comments: CN504 is the connector between the DC to DC converter andthe VS bd. No volt | ||
| Sony | CCDTR73 | NO EJECT/ DRUM RAMPS UP/ REPLACE X502 OFF OF IC505 | When powering up unit will spin the drum and stop. No otherfunctions work. After resoldering IC505 same problem. Isolated problemon servo board VC125, and found X502 not oscillating. | ||
| Sony | CCDTR70 | UNIT PLAYS WITH NO TAPE INSIDE / RPL PS500 | Unit goes into play with no tape inside also does not sensereel rotation. Found PS500 open | ||
| Sony | CCDTR600 | NO FUNCTION AT ALL; NO EVF / RESOLDER CN504 ON THE VS125 BD | You hear a beep when changing from VTR mode to camera mode,but no function at all and no EVF. Found bad CN504 on VS125 board. -SOLUTION :Resolder CN504 on VS125.- HQ Comments: CN504 is the connector between the DC to DC converter andthe VS bd. No volt | ||
| Sony | CCDTR600 | NO EJECT/ DRUM RAMPS UP/ REPLACE X502 OFF OF IC505 | When powering up unit will spin the drum and stop. No otherfunctions work. After resoldering IC505 same problem. Isolated problemon servo board VC125, and found X502 not oscillating. | ||
| Sony | CCDTR400 | INDIVIDUAL MOTOR TESTING USING RM-95 | Models such as the CCDTR400 and CCDFX430 do not include themotor test on one of the service procedures, ex, capstan forward andreverse drum forward and reverse etc. | ||
| Sony | CCDTR400 | UNIT PLAYS WITH NO TAPE INSIDE / RPL PS500 | Unit goes into play with no tape inside also does not sensereel rotation. Found PS500 open |