Dicas Reparação





Pesquisa:

Resultados 81731

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyTCW5
WILL NOT RECORD; NO BIAS OSCILLATOR The unit would not record. Bias oscillator was not running.
SonySPP100
ID NUMBERS ON ROM ICS The ROM ID numbers were different in the same package were notthe same ID numbers. I will reorder part. -HQ COMMENTS: The numbers on the ROM chips themselves do not indicatethe ID code that is written internally. It is a manufacturing code. Ifound, a
SonyD11
DISPLAY WINDOW NOT INCLUDED WITH TOP CABINET The exploded view on page 24 of the S/M shows the displaywindow as part of the Top Cabinet (Ref. No. 67). This is not the case.
SonyXR350
FM CUTS OUT OR FADES, FM SCAN LOCKS UP, INTERMITTENT Symptoms include FM cutting out or fading unit locking up inFM scan and may be intermittent.
SonyXR7000
FM CUTS OUT OR FADES, LOCKS UP IN FM SCAN, INTERMITTENT Symptoms include FM cutting out or fading unit locking up inFM scan and may be intermittent.
SonyMDP700
CORRECT PART NUMBERS FOR WOODGRAIN SIDE PLATES
SonySTRAV1020
OPENS 5.15A FUSES INTERMITTENTLY - NO AUDIO OUT Unit came in with all front panel lights lit and no audio.Replaced F-852 - 851 unit played for two days and fuses opened again.
SonyCFSD30
DIR MECHANISM MALFUNCTION When playing tape and DIR switch is pushed, it sounds likeboth sides of tape are being played.
SonyCDPC500
WILL SKIP ON MCA "SEASCAPES" DISCS Unit will not play MCA disc Seascapes by Michael Jones butwould play other manufacturer's discs. This disc is thinner ply thanother discs and you can see through the data. The spindle was not in ahigh enough position to read disc correctly. Sounded li
SonyLBTV102
CASSETTE RUNS FAST Cassette (A) runs too fast.
SonyLBTV102
NO TURNTABLE OPERATION Turntable socket (CNJ-604) loose and not working.
SonyTAM30
INTERMITTENT NO AUDIO Intermittently, audio is very low on playback ICM.
SonyKV27XBR50
BUZZING SOUND, APPLIED SILICON TO CASE OF T-602 Buzzing sound originating from T-602. This was an intermit-tent condition.
SonySPP170
UNIT DOES NOT WORK AFTER MAIN BOARD IS REPLACED The unit does not work after the main board in either thebase or the handset is replaced. -HQ COMMENTS: The replacement boards have blank ID ROMS. Therefore,after replacing either the handset or base unit board, remove the ID ROMsfrom both old boards (
SonySPP120
UNIT DOES NOT WORK AFTER MAIN BOARD IS REPLACED The unit does not work after the main board in either the baseor the handset is replaced. -HQ COMMENTS: The replacement boards have blank ID ROMS. Therefore,after replacing either the handset or base unit board, remove the ID ROMsfrom both old boards (



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads