Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | TAU10 | ICM TIMING FAILURE | Approximately 15 seconds into incoming message recording, theunit disconnects the line. | ||
Sony | DTX10 | SCHEMATIC DISCREPENCY: D-D CONVERTER +7.5 VOLT LINE | There is obviously something missing or drawn erroneously onthe power board schematic (page 46 of the service manual, coordinates M35). The 7.5V line (pin 7) is shown as being directly connected tothe 12V backup line (pin 1). What is the correct route | ||
Sony | SLHF900 | SUB CHASSIS ASSEMBLY PART NUMBER | Service bulletin indicates new part number is a X-3691-643-3.This new part has two additional posts on it which will not allow it to beused. Our technician in San Bruno said he removed both of these at onetime when he repaired this unit. Servicer claim | ||
Sony | RMP301 | REMOTE WON'T PROGRAM | When using learn function after successfully programming 2buttons the unit ceases to function. Upon reset/program clear unable tore-program, even first two buttons which were initially programed. | ||
Sony | KV19TR20 | WEAK SOUND, REPLACE C-252 ON "K" BOARD | Weak sound. | ||
Sony | KV32XBR10 | NO POWER, RESOLDERED Q-602 ("F" BOARD) | Set won't come on. | ||
Sony | KV13TR20 | NO PICTURE, REPLACED D-513 | No picture | ||
Sony | KX2501A | RETRACE LINES ON PICTURE, REPLACED R-704 | Retrace lines in picture. | ||
Sony | KV19TR20 | DEAD (NO HV), REPACED Q-550 H DRIVE TR | No HV. | ||
Sony | STRAV220 | NO DISPLAY OR OUTPUT | No display or output although click of relay can be heard whenunit is switched on. | ||
Sony | STRAV720 | NOISE (OUTPUT) ALL THE TIME IN ONE CHANNEL VIDEO/AUDIO OUT | Noise (output) audible on one channel of audio output whenVideo 1 input selected. | ||
Sony | TAE1000ESD | UNABLE TO SELECT ANY INPUT EXCEPT TUNER | Only input available is a muffled tuner. You are able toselect different inputs with front panel controls. Panel shows new requestbut audio does not change. | ||
Sony | CCDTR7 | HOLDER BLOCK ASSEMBLY FOR CCDTR7 | Is there a part number for the holder block assembly for theCCDTR7? There is a part number for the CCDTR5 holder block (ref no. 151in the TR5 manual), but it does not have the eject springs (ref. no. 157and 153 in the TR7 manual) included, and there are | ||
Sony | D9 | UNIT WILL NOT WORK WITH BATTERIES (INTERMITTANT) | Unit will work with AC adaptor, but intermittently will notwork with batteries. It will play with batteries when you press the P.C.board. | ||
Sony | STRAV320 | UNIT SWITCHES OFF AFTER TWO - TEN MINUTES | Unit switches off after two - ten minutes. There is stillplayback with volume control at zero and when surround sound is switchedon a loud buzz occurs. |