Dicas Reparação





Pesquisa:

Resultados 81729

MarcaModelo
(Chassis)
SintomaCausaSoluçãoPor:
SonyKPR53EX20
COVER VIBRATING, ADDED SPONGES Mirror cover was making loud vibrating sound when externalspeakers were used. Customer had amplifier and would crank up volume.
SonyDTC75ES
NEED OPTICAL CABLES FOR TESTING DAT UNITS Need optical cables for DAT units for testing. -HQ COMMENTS: Use part number POC-15 to order cable.
SonyDTC700
NEED OPTICAL CABLES FOR TESTING DAT UNITS Need optical cables for DAT units for testing. -HQ COMMENTS: Use part number POC-15 to order an optical cable.
SonyCDPC500
NO DISPLAY AND SLOW CAROUSEL MOVEMENT Unit had no display and slow carousel movement.
SonyCDPC400
NO DISPLAY AND SLOW CAROUSEL MOVEMENT Unit had no display and slow carousel movement.
SonyCDPX33ES
NO AUDIO FROM VARIABLE LINE OUT Variable line out cable from VR board to Main board wasnot plugged into CN-451. There was no output at variable line out.
SonyDTC75ES
WILL NOT REWIND INTERMITTENTLY Will not rewind intermittently.
SonyD25
DEAD UNIT No power with battery or AC adaptor.
SonyD25
WON'T PLAY WITH BATTERY OR ADAPTOR D-25 won't play or charge battery.
SonyD66
SKIPS REAL EASILY D-66 skips real easily.
SonyD9
DISC WON'T SPIN Disc won't spin when Play is pushed. M-901's resistance isonly 1 Ohm instead of the normal 12 Ohms.
SonyDTC75ES
PART LOOSE INSIDE UNIT Servicer found C-914 loose inside unit. Leads on capacitorappear to have been cut too close in factory and it fell out duringtransit.
SonyKV1311CR
POWER ON/OFF FUNCTION ONLY, REPLACED C-129 Set would power On and Off with remote or front of set, but noother keys on set or remote would work. Set had no volume and minimumpicture. Sleep light would not go out. Found C-129 off of IC-104 pin 22shorted.
SonyKV32XBR65
PINCUSHION DISTORTION, REPLACED R-571, L-501 Set had narrow bowed-in picture on both sides. Found R-571on the A board had changed value to 22 Ohms.
SonyKV8AD10
DEAD Dead set - Blows F-604 fuse. Found Q-651 shorted.



Assistência TécnicaAs dicas apresentadas destinam-se a técnicos de eletrónica, a tentativa de reparação ou assistência sem ter conhecimentos de eletricidade e eletrónica, podem provocar danos mais graves aos equipamentos e, devido a tensões muito elevadas em alguns circuitos, graves danos fisicos que podem constituir um risco em determinadas reparações.

Não arrisque reparar equipamentos com tensões elevadas se não tiver conhecimentos técnicos para o fazer em segurança.

Verifique se o esquema está disponível na área de downloads