Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | KV27EXR15 | NO SOUND, REPLACE IC-405 | No sound. Signal input to IC is ok however, there isno output. DC bias voltages are all near normal. | ||
Sony | TCW390 | NO RECORD | Input signal to IC-341 is good but no output. Replaced IC-341with no change. | ||
Sony | CDXA100 | WILL NOT WORK WITH RMX-2 | Will not work with RMX-2. E04 error display shows. Alsopertains to serial number 103051. | ||
Sony | CDXR79 | INTERMITTENT EJECT | After pressing eject button, you can hear the loading motorrun but the disc will not eject. | ||
Sony | CDXR77 | INTERMITTENT EJECT | After pressing eject button, you can hear the loading motorrun but the disc will not eject. | ||
Sony | CDX6020 | INTERMITTENT EJECT | After pressing eject button, you can hear the loading motorrun but the disc will not eject. | ||
Sony | HST201 | PART NUMBER MISSING IN SERVICE MANUAL | The Service Manual doesn't list a P/N for part reference no.169 on page 24. There are also two reference number 158 parts shown indiagram. | ||
Sony | KV27XBR15 | CLOCK GAINS TIME, ADD .1 UF/50V BETWEEN Q-105 BASE TO GROUND | Clock gains time. | ||
Sony | D180K | STATIC INSTEAD OF AUDIO | Static instead of audio. | ||
Sony | CDPC75ES | POWER ON/NO FUNCTION | When unit was turned on, it would display multiple white dotsand would not accept any commands from front pannel or remote. Problemseemed to be constant. | ||
Sony | CDPC700 | DISC TRAY CONTINUOUSLY ROTATES BACK AND FORTH | Disc tray would rotate back and forth when unit was turned on.You could open and close tray but tray would continue to rotate back andforth. | ||
Sony | TAE1000ESD | PART NUMBER FOR DISPLAY PCB WITH ALL COMPONENTS | We are trying to order a mounted display board with allcomponents. The service manual only lists a bare PCB. Is it possible toget a complete board? -HQ COMMENTS: According to KCPs information, you can't get a complete PCboard if the PC board has less | ||
Sony | CDXR7 | MISSING PART NUMBER FOR IC-352 | This particular unit at Kansas City SSC has an IC-352 on theMain board. It is a surface mount device with the number T8543H74HC04printed on it. It doesn't show up in the parts list or the schematic. Ihaven't found it in any bulletins, supplements, or | ||
Sony | KPR41DS2 | MISCONVERGENCE AFTER WARM UP, REPLACED NECK ASS'Y | authorized servicing dealer advised red would shift approx. 1inch after warm up. While troubleshooting as directed, they found theneck assy. on the CRT to be cracked in three places. The XR Board wasnot broken from the assy. Also found Neck Assy. crac | ||
Sony | SPP90 | BATTERY NOT LASTING - DISCHARGING | Battery not lasting in standby for full 20 hours. Some onlylast 12-16 hours. Others last even less. |