| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TAE1000ESD | NO P/N LISTED FOR THE CAPS THAT COVER THE OPTICAL INPUTS | The small plastic covers that are inserted into the opticalinputs when they are not being used do not have a part number. They arenot shown on the exploded view, nor are they listed in the parts list.We have a customer that did not receive them with his | ||
| Sony | JIGS | AVAILABILITY OF EXTENSION CABLES FOR LD SERVO CHECKER | SSCs are in need of replacement cables for the LD ServoChecker (J-6166-370-A) used to service MDP units. Currently, we areunaware of any part numbers for these cables. Please inform if thesecables have registered part numbers, or if you plan to registe | ||
| Sony | GEN-CAM | LITHIUM BATTERY CR-2025 | I need the part number of lithium battery CR-2025 without tab.GV-8 uses CR-2032 part number, 152-817-431. I tried on camera and itworks fine but hard to remove because CR-2032 is thicker thanCR-2025. -HQ COMMENTS: There is no part number registered for | ||
| Sony | TAE1000ESD | REMOTE COMPATIBILITY PROBLEM WITH STR-AV560 REMOTE | The customer has a TAE-1000 and a STR-AV560. He uses theSTR-AV560 for a tuner and a rear channel amplifier. When he selects tunerpresets with the STR-AV560 remote, the surround mode on the TAE-1000changes. Similarly, when changing surround modes with | ||
| Sony | KV32HSR10 | UNSTABLE MTS AND MUTE, "X" BOAD IC-251 MTS DECODE IC REPLACE | Display functions on screen are ok. All customer adjustments,volume, color, MTS and mute would not function until channel was changed.Picture control operating normally. | ||
| Sony | KV20HFR | DISPLAYED ONE CHANNEL ONLY, REPLACE IC-501 | The unit displayed one channel only and when you changedchannels, you loose all channels. | ||
| Sony | SLHF860D | UNIT WOULD NOT TURN ON - OR ACCEPT INPUT COMMANDS | Unit would turn on, accept cassette, load and thread tape butwould not accept any further input commands (no play, eject etc.). Itwould not even turn off. You would have to unthread manually pin 63,IC-501 had no DC voltage on it - it was already low. | ||
| Sony | SLHF860D | UNIT WILL NOT RECORD | Unit would not record - playback was ok. Scope shot revealedsignal was present at pin-23 of IC-201 but nothing at the output pin 17.Pin 17 also had 6-3Vdc on it at all times. | ||
| Sony | KV27XBR60 | IC-101 SUBSTITUTION, SEE TVP SERVICE BULLETIN NUMBER 092 | Some inquiries have been received regarding this IC. In somecases when the servicer orders the original IC (M37100M8-717SP), adifferent IC is sent (M37100M8-711SP). The -711 IC is not a substitutionfor the -717 IC. Please check when ordering this item | ||
| Sony | KV32XBR70 | IC-101 SUBSTITUTION | Some inquiries have been received regarding this IC. In somecases when the servicer orders the original IC (M37100M8-717SP), adifferent IC is sent (M37100M8-711SP). The -711 IC is not a substitutionfor the -717 IC. Please check when ordering this item | ||
| Sony | KV32HSR10 | IC-101 SUBSTITUTION, NO SUB EXIST | Some inquiries have been received regarding this IC. In somecases when the servicer orders the original IC (M37100M8-717SP), adifferent IC is sent (M37100M8-711SP). The -711 IC is not a substitutionfor the -717 IC. Please check when ordering this item | ||
| Sony | KV27XBR10 | IC-1O1 SUBSTITUTION, SEE TVP FLASH 037, AND SB # 92 | |||
| Sony | CCDF70 | DARK STREAKS RUNNING THROUGH CAMERA PICTURE | Picture from camera had intermittent dark streaks. Picturewas also darker than normal. | ||
| Sony | WMAF54 | WRONG PART NUMBER FOR CHASSIS | The part number for the chassis in the service manual is forthe WMBF58. The number for the WMAF54 is 3-345-603-01. -HQ COMMENTS: Thanks for the info. A service bulletin will be issued.This applies to the WMAF58 as well. | ||
| Sony | SPP110 | UNIT DOES NOT REDIAL CORRECTLY IN BATTERY SAVE MODE | Unit will only redial 8 digits reliably when going into Talkmode from Batt Save mode. Any additional digits are either not dialed atall or dialed incorrectly. However, when going into Talk mode from Norm(standby) mode, the redial function works flawles |