Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CDPC100 | DISC WILL NOT GO INTO MAGAZINE | Disc will not go back into magazine in certain slots. It jamshalf way in. I detected some wear and scratches on the metal springwithin the magazine. This causes the disc to stick and not go backinto the cartridge. | ||
Sony | D160 | FAILURE OF UNIT DUE TO USE OF IMPROPER POWER SUPPLY | Used power supply with reversed polarity (i.e. RadioShack etc.) usually burns D-804 and Q-404. Symptoms include: dead unit,spindle turns backward (due to Q-404 failure), sled to outer perimeter.IC-802 fails due to surge and kills 5V supply. The majorit | ||
Sony | HBA5000 | UNABLE TO INPUT CONTROLS FROM THE PAD | Unablt to input controls from the pad. | ||
Sony | HBA5000 | NO SOUND | No Sound. | ||
Sony | HBA5000 | COLOR SMEAR | Color smear appears at the right edge of the picture. | ||
Sony | HBA5000 | LOSS OF ONE COLOR | Loss of one color. | ||
Sony | HBA5000 | DISTORTED PICTURE | Strange or distorted picture. | ||
Sony | HBA5000 | PICTURE DISAPEARS WHEN THE UNIT IS MOVED OR BUMPED | Picture disappears when the board is moved or twisted. | ||
Sony | GEN-CAM | MODE SELECTOR III CONVERSION CONNECTOR CABLE ASSEMBLY | This part is necessary to hook up the mode select box to test8mm mechanical assemblies. It is replaced by a new version - Part No:J-6082-021-A. -HQ COMMENTS: Please refer to the 8mm Video Mechanical Adjustment ManualII on page 6. | ||
Sony | ST7TV | NO FUNCTIONS ONLY POWER BUTTON WORKS | Only power button worked. SIRCS appeared on pins 22 of IC-401and 31 of IC-402. Could not control any functions. | ||
Sony | WMF2081 | INTERMITTENT AUDIO | The spring which makes contact from the main PCB to themotor (for ground), is shorting audio on main board. This spring comesdown the main board, then loops back up through. When it loops throughhole in board, it makes contact to trace around hole, sho | ||
Sony | CCDTR5 | NEW OPTICAL FILTER FOR LENS | After replacing the lens block, the picture may either bevery harsh or soft. | ||
Sony | KV2697R | PURITY, CONVERGENCE CANNOT BE ADJUSTED, REPLACE TH-601 | Purity, convergence could not be adjusted. Servicer triedtwo tubes and problem was still there. | ||
Sony | CCDF35 | LOADING MOTOR RUNS FWD AND REVERSE INTERMITTENTLY | Loading motor runs forward and reverse intermittently whenloading and unloading. Erratic operation of loading/unloadingintermittently. | ||
Sony | CCDF35 | NO STOP OR REWIND | No stop or rewind. Play is ok. |