Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CDPC30 | BLACK PLASTIC COVER ON OPTICAL BLOCK MELTED | Black plastic cover on optical block melted. The pickup andthe drive IC to it were replaced, but after a month the problem reoccured. -HQ COMMENTS: I checked the optical pickup that you sent me. It wouldappear that the solder connections of the trackin | ||
Sony | CCDTR5 | EATS TAPES | Unit eats tapes. The press-fit pins that hold the cassetteholder block assembly to the LS chassis had come out. | ||
Sony | CCDF35 | WASHED OUT PICTURE | Iris Mechanism binding slightly. | ||
Sony | CFSW510 | SERVICE MANUAL AVAILABILITY | There is no service manual available for this unit. -HQ COMMENTS: The service manual for this unit will be late. Pleaserefer to the service manual for the CFS-W380 since this unit is verysimilar. The part number for the head assembly you needed isX-33 | ||
Sony | CCDF30 | NO SYNC ON CAMERA VIDEO | No sync on camera video. | ||
Sony | XR66 | SERVICE BULLETIN CORRECTION - NO EJECT SYMPTOM S/B NO. 164 | Service bulletin No. 164 states that to resolve anintermittent No Eject problem, IC-701 has been changed from TC9310N-065to TC9312-040, and change R-719 from 27K to 47K. The type numbers arecorrect for XR-740/780/787R, but incorrect for XR-66. | ||
Sony | CCDTR5 | LOW LUMINANCE ON SELF-RECORDED PLAYBACK | Distorted picture on playback of self-recorded tape. | ||
Sony | KV27HSR10 | VERTICAL PROBLEMS, C-504 COLD SOLDERED ("A" BOARD) | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV32HSR10 | VERTICAL PROBLEMS, C-504 COLD SOLDER | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV27XBR60 | VERTICAL PROBLEMS | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV27XBR10 | RETRACE LINES ON BOTTOM OF SCREEN , COLD SOLDER C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV32XBR70 | VERTICAL PROBLEMS, RESOLDERED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV32XBR10 | VERTICAL PROBLEMS, RESOLDERED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV27XBR65 | VERTICAL LINES ON BOTTOM OF SCREEN, REPLACED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
Sony | KV27XBR15 | VERTICAL PROBLEMS, RESOLDERED C-504 (IC-500/PIN 5) | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The |