| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | TCFX110 | PART NUMBER FOR T-REEL ASSEMBLY | The part number for the take up reel assembly is not listed inthe service manual. -HQ COMMENTS: Please refer to the TC-FX150 service manual since thesedecks are similar. The part number is 4-894-963-01. | ||
| Sony | DRP1 | REPAIR/EXCHANGE STATUS | No schematic is provided for this unit only a one-pageservice manual exists. Do we repair or exchange it? -HQ COMMENTS: Please exchange the unit. This model will be added to theexchange list. | ||
| Sony | CCDV11 | QUICK REPAIR OF CCD-V11 LENS UNIT ASSEMBLY | Broken focus ring - zoom ok. | ||
| Sony | KV2092AEB | REAR COVER P/N, 4-376-474-11 | Part number needed for rear cover. -HQ COMMENTS: The part number is: 4-376-474-11. | ||
| Sony | CCDTR5 | DOOR WILL NOT CLOSE | The TP arm block assembly (page 215, reference number 175) hadcome out of unit. The T protector assembly was bent. Replaced theseparts (including washers and joint bar). Unit would close and start toload. Then unit would jam due to misalignment of TP | ||
| Sony | ICF2010 | INCORRECT SCAN | After entering the lower and upper scan limit frequencies in,the unit would not scan correctly after pressing the scan start button.This also pertains to serial numbers 302902, 302903 and 303001. | ||
| Sony | STRGX6ESII | INSULATING MICA PART NUMBER | I need the part number for the insulating mica for the outputtransistors (2SC2921/2SA1215). Not listed in two page service manual forthis model and different than those used in GX6ES. Because of the largesurface area and suction of heat-sink compound, | ||
| Sony | D160 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D180 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D9 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D4 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D2 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | CDXR79 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | CFS902 | PART NUMBER LISTED FOR S302 IS WRONG | Part number 1-570-347-31 is a two-position switch. This isthe wrong switch. It needs to be a three-position switch. | ||
| Sony | CFS903 | PART NUMBER LISTED FOR S302 IS WRONG | Part number 1-570-347-31 is a two-position switch. This isthe wrong switch. It needs to be a three-position switch. |