| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | ACV33 | DC CONNECTING CABLE PART NUMBER | What is the part number for this cable? -HQ COMMENTS: The part number for this cable is 1-559-354-21. | ||
| Sony | ACV30 | DC CONNECTING CABLE PART NUMBER | What is the part number for this cable? -HQ COMMENTS: The part number for this cable is 1-559-354-21. | ||
| Sony | CCDF50 | ZOOM CONTROL DID NOT WORK IN WIDE ZOOM | Zoom did not work in wide position. | ||
| Sony | SL2000 | PART NUMBER FOR LEVER AT TOP OF PAGE 4-14 IN SERVICE MANUAL | Need part number of lever used in cassette compartment lockassembly. -HQ COMMENTS: Part number is X-3669-366-0. A service bulletin will beissued. | ||
| Sony | CDPC401 | OPTICAL ASSEMBLY BRACKET | Page 20 of the service manual (see the unidentified bracket)surrounded by reference numbers 107, 106 and 120. Service bulletin No. 31indicates the part number is 4-924-445-01. An ASC received the part andclaims the tabs on the right side of the drawing | ||
| Sony | CDPC400 | OPTICAL ASSEMBLY BRACKET | Page 20 of the service manual (see the unidentified bracket)surrounded by reference numbers 107, 106 and 120. Service bulletin No. 31indicates the part number is 4-924-445-01. An ASC received the part andclaims the tabs on the right side of the drawing | ||
| Sony | SLV50 | NO OPERATION AFTER SOME TIME | When the power switch is turned on, the unit works for awhile.After some time, no functions will operate. Turning power off and onwill cure this problem for awhile, but will occur again sometime later. | ||
| Sony | SLV70HF | NO OPERATION AFTER SOME TIME | When the power switch is turned on, the unit works for awhile.After some time, no functions will operate. Turning power off and on willcure this problem for awhile, but will occur again sometime later. | ||
| Sony | CCDF35 | UNIT WOULD NOT GO INTO RECORD | Unit would not go into record, tape indicator blinked. | ||
| Sony | DTC1000ES | PRE-MATURE FAILURE OF PINCH ROLLER | Rubber pinch roller becomes dry and glazed after only 10-12months. Checked with owners to make sure they were not using head clean-ing fluid to clean rubber parts. In all cases the answer was no. Sampleis enclosed. -HQ COMMENTS: I will forward your s | ||
| Sony | STRGX6ES | UNUSUAL GROUNDING POINT PROBLEMS | Unit displays unusual symptoms or problems with sound powersupplies, volume board, input select board and display board. | ||
| Sony | GM80 | CRACKING/STRESS ON FRONT PART OF MOUNTING BRACKET | The GM-80 mounting bracket is stressing and cracking. Thesection mounted to the vehicle (not to XV-M8 monitor) is stressing thentearing and cracking causing XV-M8 to dislodge and drop. Material is madefrom thin gauge metals which appear to become stres | ||
| Sony | XVM8 | VIBRATION DAMAGE TO CABINET | Many units have stress marks, cracking and loosened mountinglugs. The 4 mounting lugs on top of monitor are recessed into the plasticcabinet without any metal substructure. We determined that installationinto a typical bus/van was proper. High vibrati | ||
| Sony | CCDF40 | NEED FOR EXTENSION CABLE WHEN SERVICING CAMERA | Servicer has requested that extension cables be made availablefor CN-007 on (SS-86) board. The cable on the camera is very short and itis difficult to operate the camera in the dis-assembled state for thepurposes of repair. Please advise if cable can b | ||
| Sony | CCDF70 | NO AUTO FOCUS IN TELE MODE | Auto focus will not focus in Tele mode. |