| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | MHC2000 | PART NUMBER FOR FLAT CONNECTOR | Cannot find service manual and therefore part number for theflat connector. -HQ COMMENTS: This system is an (E) model. It consists of an ST-707Rtuner, TC-R707 cassette deck, TA-707 amplifier and APM606 speaker. Thissystem is identical to an MHC-2000 U | ||
| Sony | CDPC70 | REPLACEMENT FRAME ASSEMBLY FOR CDP-C50 | Support post for gear (Loading C) is not part of replacementframe assembly. The frame requires replacement when the post holding partNo. 61 set lever breaks. Rather than undergoing the monumental task ofreplacing this entire assembly, only to have to m | ||
| Sony | CDPC7ESD | REPLACEMENT FRAME ASSEMBLY FOR CDP-C50 | Support post for gear (Loading C) is not part of replacementframe assembly. The frame requires replacement when the post holding partNo. 61 set lever breaks. Rather than undergoing the monumental task ofreplacing this entire assembly, only to have to m | ||
| Sony | KV1546R | VERT. OUT IC SUB. CAUSES LINE ACROSS THE SCREEN, ECG1420 | Installed replacement IC and now have a blanking bar acrossthe center of the CRT. Please advise ASAP. If another UPC1358H is in-stalled, everything is ok. -HQ COMMENTS: ECG-1420 (Philips) can be used instead. | ||
| Sony | KV1545R | VERT BIAS LINE ACROSS THE SCREEN,USE UPC1368H2 8-759-103-68 | Installed replacement IC and now have a blanking bar acrossthe center of the CRT. Please advise ASAP. If another UPC1358H is in-stalled, everything is ok. -HQ COMMENTS: We are working to find a solution to this problem we willinform you accordingly. | ||
| Sony | GENERAL | INCORRECT PART NUMBER | The semiconductor replacement shows MN-8303 replaced by2SC3263-0. Part number is 8-729-304-26. | ||
| Sony | KV2649RX | FVR CONTROL ARCING | New part installed. It started arcing after approximately3 1/2 hours. Has there been other reports of this? Do you know what thevoltage should be at MU term of FVR Res. assembly. -HQ COMMENTS: The voltage at the MU terminal should be 7 KV and at FVte | ||
| Sony | KPR4110 | HEAT SINK NO LONGER AVAILABLE, IT HAS BEEN MADE AVAILABLE | Heat sink on (D) board used on IC-6008 and IC-006 are nolonger available. We have been using extra heat sinks, part number2-261-207-00, on IC-6008 and IC-6006. We have found by using them itallows the ICs to run cooler and we have had no recurring prob | ||
| Sony | HVL80D | PART NO. FOR L-BRACKET ABOVE REF. NO. 10/PG.18 - SVC. MANUAL | Need part number for L-Bracket above reference number 10 onpage 18 of service manual. -HQ COMMENTS: Part number is 2-398-023-01. The CSV-3 service bulletinnumber CAM0022 will be updated. | ||
| Sony | TAE77ES | PART NUMBER FOR IC-607 | The part that is received when IC-607 is ordered from theservice manual is a surface mount IC However, the IC in the unit is aDIP. -HQ COMMENTS: Try ordering part number 8-759-000-36 it is a MC14028BCP. | ||
| Sony | CCDTR5 | NO EJECT | No eject - no capstan rotation. Leads to capstan motorconnector are cracked. | ||
| Sony | CCDTR5 | NO EJECT | No eject, threading not complete. | ||
| Sony | CCDTR5 | TAPE JAMS | Tape jams. | ||
| Sony | CCDTR5 | PLAYBACK PICTURE IS DISTORTED | Playback picture is distorted. | ||
| Sony | CCDTR5 | COUNTER DISPLAY DOES NOT FUNCTION | Counter display does not function. |