Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | SLHFT7 | INTERMITTENT NO BETA HIFI PB | Intermittent no Beta Hi-Fi. Flexing board would causeproblem to come and go. Could not troubleshoot to component level. | ||
Sony | CCDV110 | BAD PLAYBACK | Poor playback picture. | ||
Sony | CCDV110 | DEAD - TAPE STUCK | Found not power up unit. | ||
Sony | SLHFT7 | LINES IN PICTURE ON SOME CHANNELS | Lines in picture on some channels. | ||
Sony | SL100 | NO FUNCTIONS, TAPE STUCK | No functions, pause light on all the time, with power on capsand drum both running. | ||
Sony | CCDV1 | NO LED DISPLAY | No led display. | ||
Sony | CCDV110 | NO RF PICTURE | Picture in viewfinder was good but no picture using RFadaptor. | ||
Sony | APM007AV | NEED PART NUMBER | Need part number of switch board on page 2. -HQ COMMENTS: The amp board includes the SW board. Please order1-613-776-00 from KCP. | ||
Sony | D7 | OPTICAL PICK-UP REPLACEMENT | After replacing optical ass'y, unit not functional or veryintermittent. | ||
Sony | KV2680R | INTERMITTENT AND WEAK COLOR, REPLACE IC-201 | At first, the color appeared slightly weak when compared withanother color TV. Gradually, over a period of several weeks, the colorwould come and go like it was having trouble locking on to the station. | ||
Sony | WMF50 | BATTERY LID PART NUMBER MISSING | Battery lid part number not listed in service manual. Wasadvised by Tech. Dept. that the part number for the battery lid isX-3330-416-1. | ||
Sony | HMK3030 | PINCH ROLLER PART NUMBER WRONG | The part number for the pinch roller in the HMK-3030 is wrong.When you order the pinch roller part number, you get the mechanicalchassis. In the manual, the mechanical chassis and pinch roller are thesame part number (X-3573-102-0), and this part number | ||
Sony | CCDV8AFU | NO AUTO FOCUS | No auto focus because of open infra-red emitter diode. | ||
Sony | CCDV8AFU | HAIRLINE CRACKS IN PLASTIC NEAR SCREW HOLES | Hairline cracks in plastic near screw holes. These cracksoccur immediately upon installation of handle to base. | ||
Sony | SLHF900 | HEAD CLOGGING | When using high grade tape heads clog in just a matter ofhours following cleaning. Three samples: this machine and two others,all are original filled heads. |