Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | TV520 | DIFFERENT PINOUT | Substitute picture tube has different pinout than originalone. KC says that this is a good sub but a bulletin was issued on howto rewire set, I can find no record of it. -HQ COMMENTS: We will investigate this problem and if necessary, issuea T/N and S/ | ||
Sony | SPP11 | NOISE IN HANDSET | Hand set would make all kind of noises. When power was firstturned on, it would dial one digit. | ||
Sony | SL10 | NOISY SPECIAL EFFECTS IN BETA II | Beta II Pause, Betascan and Beta Skipscan is noisy anddifficult to watch. -HQ COMMENTS: This is normal operation for the SL-10 in Beta II opera-tion. This model does not have the required 1/2H delay line or the jogprocess IC which is used for error fre | ||
Sony | CFS5000 | INCORRECT P/N - BAND SELECT SWITCH | Part number ordered is also stamped on part received. Partordered is two position switch approx. 1 1/2 inches long with 8 pins inmiddle, part received is approx. 2 inches long with 16 pins along entirelength. We think part number in the manual is wrong | ||
Sony | CCDV8 | DRUM WAS NOT STARTING | Drum was not starting. | ||
Sony | CDP200 | CHUCKING ARM ASS'Y | Chucking arm seems to be the biggest problem on this model.Can the arm assembly be updated to the magnet type used in CDP-302? FSCshave chronic complaints and no positive solution. -HQ COMMENTS: The CDP-200 has no magnetic type arm assy. To correct th | ||
Sony | CDP70 | NO SLED OPERATION | Sled motor would not run. | ||
Sony | CDP520ES | SKIPS BACKWARDS NEAR END OF DISK | On last selection, sled jumps backwards. | ||
Sony | SL2500 | FULL ERASE HEAD ON AT ALL TIMES | No playback except for the first few sec. Counter works for5 sec then stops as picture disappears. Found no video/audio or CTL afterrewinding and tried to play it. Power was already on and erasing tape. | ||
Sony | WM16 | AUDIO IS DISTORTED - TAPE SPEED TOO FAST | Motor control board cracks when bottom case is put on unit.This causes motor to run too fast. | ||
Sony | SL2710 | CLOGGED HEAD | Repetitive clogging, then one head dead. | ||
Sony | CFS950 | PROBLEM WITH CASSETTE LOADING | A Sony LNX90 cassette would not load properly. The tape wouldblock the head and pinch roller from engaging. | ||
Sony | SPP22 | CANNOT TALK OUT | All functions were normal except talking from hand unit, theother person could not hear. | ||
Sony | SPP22 | NO FUNCTION | No function at all. | ||
Sony | SPP22 | NO DIAL TONE | No dial tone and could not talk out. |