PANASONIC Service Mode (Modo de Serviço)
Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
PANASONIC
TV
Factory reset
1. Turn On TV 2. Pressione [VOL - ] na TV & [MENU] no remoto por mais de 5 segundos.
PANASONIC
PLASMA
Service Mode
Manter Pressionado a tecla VOL- no televisor de plasma.
Premir RECALL 3 vezes no remoto.
Use 1234 no remoto para navegar, VOL+ VOL- para alterar.
Premir RECALL 3 vezes no remoto.
Use 1234 no remoto para navegar, VOL+ VOL- para alterar.
PANASONIC
TV
Service Mode
Press (VOL -) on TV then press (INFO) in remote 3 times in 2 seconds.
PANASONIC
TV
Service Mode
Pressionar (VOLUME -) na unidade, pressionar (INFO) no remoto 3 vezes em 2 segundos.
PANASONIC
TV-LCD
Service Mode
1. Press f button to access volume setting.
2. Press v- button on set until volume reaches minimum.
3. While still holding v- button press 0 button three times on remote control.
4. Press 1 and 2 buttons to scroll through the menu.
5. Press 3 and 4 buttons to select an adjustment.
PANASONIC
TV
Service Mode
With remote or TV front panel controls.
1. Select the SETUP icon and select CABLE tuner mode
2. Select the TIMER icon and set the SLEEP time for 30 minutes.
3. Exit the Action menus.
4. Tune to Channel 124
5. Adjust volume to zero.
Then with the front panel control:
6. Press the VOL < button (decrease) on the TV. A red "CHK" appears in
the upper left corner of screen.
PANASONIC
TV
Service Mode
Ajuste o off timer para 30 minutos
Prescione recall no controle e vol- na tv em alguns segundos ira aparecer CHK para dados na memoria use mute vol-simultaneamente ainda com o osd no modoCHK1 a tecla 4 avança na memoria e 3 recua
Nota para mover CHK! para CHK 2 CHK3 prescione a teclas 2 para avançar e 1 para retroceder
Para sai do modo de serviço prescione a tecla normal ou power
PANASONIC
TV
Service Mode
Seleccione canal 124 catv ajuste vol- na tv Ajuste sleep para 30 e pressione vol- na tv para alterar chq pressione power para alterar dacs (bo b1 c0 c1 pressione ch+ ch- para aceder a outros endereços tecla mute
Para sair action e power na tv simultaneamente por 3 segundos
PANASONIC
TV
Service Mode
Passar para o canal 124 catv, prescionar vol- para o minimo até aparecer chk, para sair simultaneamente action e vol+
Para passar modo de ajuste POWER para selecionar canal - e canal+ no caso de modo de ajuste de CRT tecla recall
B ajuste de chassi
B0 sub brilho
B1 sub cor
B2 sub tint
B3 sub contraste
B4 detetor de video
B5 saida de audio
C AJUSTE DE WHITE BALANCE
C0 centro horizontal
C1 vermelho cut off
C2 verde cut off
C3 azul cut off
C4 vermelho drive
C5 azul drive
M AJUSTE DE SOM
M0 nivel de entrada
M1 vco stereo
M2 filtro
M3 separação nivel baixo
M4 separação de nivel alto
Universal LED TV Service Mode
Most universal led tv boards check:
- Menu → 1147
- Menu → 2580
- Source → 2580
All LED TV Service Codes
- Menu → 1147
- Menu → 1185
- Menu → 1183
- Menu → 2580
- Menu → 1187
- Menu → 7050
- Menu → 8202
- Menu → 7343
- Menu → 2008
- Menu → 1999
- Menu → 0000
- Menu → 1167
- Menu → 1199
- Menu → 1234
- Menu → 2387
- Menu → 8893
- Menu → 2383
- Menu → 4725
- Source → 3138
- Source → 2580
- Source → 2585
- Source → 7342
- Source → 2583
- Source → 2283
- Source → 2285
- Source → 3195
- Source → 3137
- Source → 0000