Service Mode (Modo de Serviço)
Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
Schaub Lorentz
CTV
Service Mode
To enter SERVICE MODE, Unplug AC cord till lost actual clock time. Then press and hold Vol (-) button of main unit and remote control key for more than 2 seconds. The both pressing of set key and remote control key will not be possible if clock has been set. To reset clock, either unplug AC cord and allow at least 30 minutes before Power On or alternatively, discharge backup capacitor.
PHILIPS
CTV
Service Mode
TV preset 38 Push STOP -button on the remote and the PLAY -button on the TV simultaneously, for 5 seconds You´ll get the service menu on screen Clear EEPROM is the only cure for the problem that all items in installation menu are in " non active " mode with red text Close TV from remote, and on again Tune channels again
PHILIPS
CTV
Service Mode
This model also supports the 062596 sequence followed by [i+]/[OSD]. Service default mode is entered using the 062596 sequence, followed by the - button on the TV set itself. Alternatively you can short-circuit pins 9261 and 9262 inside the set and then powering it up
PHILIPS
CTV
Service Mode
First method: Select program 38 on the TV Simultaneously press the P key and the VOLUME+ key (keyboard/remote) To enable hotel mode you should set 'HO' to 'one'
PHILIPS
CTV
Service Mode
Second method: With the TV powered off (disconnected from the mains!) short circuit pins M61 and M62 (next to IC7600). Power up the TV and remove the short circuit. A 'S' will be displayed indicating it is in service mode Simultaneously press the P- and VOL+ keys on the TV. The screen now shows 'service menu'. To allow hotel mode from being set on and off you have to select Option 2 with the remote and set 'Hotel' to 'on'. Exit the service mode by putting the TV into standby
PHILIPS
CTV
Hotel mode for models with uP TMP47C434N-3414/3415, uP TMP47C634N-R494
Select program 38 on the TV Simultaneously press the STORE key and the PROGRAM+ key on the TV for 4 about seconds (hotel mode on) Simultaneously press the STORE key and the CONTROL- key on the TV for 4 about seconds (hotel mode off) Notes: The maximum volume in hotel mode will be the volume present when activating it STORE or INSTALL mode can not be entered The program number is displayed on the screen for 4 seconds
Universal LED TV Service Mode
Most universal led tv boards check:
- Menu → 1147
- Menu → 2580
- Source → 2580
All LED TV Service Codes
- Menu → 1147
- Menu → 1185
- Menu → 1183
- Menu → 2580
- Menu → 1187
- Menu → 7050
- Menu → 8202
- Menu → 7343
- Menu → 2008
- Menu → 1999
- Menu → 0000
- Menu → 1167
- Menu → 1199
- Menu → 1234
- Menu → 2387
- Menu → 8893
- Menu → 2383
- Menu → 4725
- Source → 3138
- Source → 2580
- Source → 2585
- Source → 7342
- Source → 2583
- Source → 2283
- Source → 2285
- Source → 3195
- Source → 3137
- Source → 0000
