| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Mitsubishi | CT2555STX | NO LUMINANCE | R286 O/C 100OHM | ||
| Mitsubishi | CT2555STX | No lum - Txt & contrast ok | R286 100R o/c pin 11 IC602 | ||
| Mitsubishi | CT2555STX | No lum | No 12v to Q253 as print o/c top edge of dec pcb | ||
| Mitsubishi | CT2555STx | Int sound & pic at sw on | C923 100µ 10v in psu | ||
| Mitsubishi | CT2555 | Ghosting or ringing. | Drys around the SAW filter or coils L4/5 , if not mod kit AFT1 mits | ||
| Mitsubishi | CT2554TX | Dead | Z902 PRF630 o/c near 5v reg | ||
| Mitsubishi | CT2554TX | DEAD | REPLACE Z902 | ||
| Mitsubishi | CT2553STX CT255 | Can not select Text : when cold will go into Text | Replace C922 & C923 ( 100uF ) | ||
| Mitsubishi | CT2553STX Euro 4Z | HT voltage | Should be 156v | ||
| Mitsubishi | CT2553STX | WONT START , NO STBY LED , STBY PIN MICRO GOES LOW , | MEM IC FAULTY | ||
| Mitsubishi | CT2553STX | INT LUMINANCE | CHECK FOR HARDENED GLUE on decoder print side | ||
| Mitsubishi | CT2553 | Int blank raster. | Drys around the SAW filter or coils L4/5 , if not mod kit AFT1 mits | ||
| Mitsubishi | CT2553 | Ghosting or ringing. | Drys around the SAW filter or coils L4/5 , if not mod kit AFT1 mits | ||
| Mitsubishi | CT2534TX Euro 4 | NO SOUND OR PICTURE + WON'T STORE STATIONS | CHECK 5v + -30v ON IC702 TRANSFORMER T951 MAYBE O/C ON PINS 4+2 | ||
| Mitsubishi | CT2534 | Memory loss | Chopper tfmr -31v supply corrosion on leg |