| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Samsung | P58C | Dead - pri HT only | C816 2200pf 1kv split, C808 & C813 100µ 16v & C817 100µ 25v low | ||
| Samsung | P55 | loss of 1 col | R803/811/818 33k 2w on crt base | ||
| Samsung | P55 | loss of 1 col | R803/811/818 33k 2w on crt base | ||
| Samsung | CX-6844N | Partial field collapse | IC301 TDA8350Q, 2 caps not marked 10µ & 100µ 63v, ceramic 10R 5w resistor across pins 3/5 of above chip | ||
| Samsung | CX-6844N | Partial field collapse | IC301 TDA8350Q, 2 caps not marked 10µ & 100µ 63v, ceramic 10R 5w resistor across pins 3/5 of above chip | ||
| Samsung | CX6844N | field - partial collapse | replace TDA8350Q IC301 & 2 caps not marked on pcb 10µ & 100µ 63v & 10R 5w res across pins 3 & 5 of IC301 | ||
| Samsung | CX6844N | field - partial collapse | replace TDA8350Q IC301 & 2 caps not marked on pcb 10µ & 100µ 63v & 10R 5w res across pins 3 & 5 of IC301 | ||
| Samsung | CW593CNG | Dead - blows LOPTr | If R821 next to opto coupler is 133k then ht should be 130 volts. if R821 is 150k then ht should be 155 volts. If still blowing line output transistor then the loptx is the probable cause. | ||
| Samsung | CW593 | St/by only with LED flashing orange & straining psu | C814 across D802 & HT supply s/c | ||
| Samsung | CW30A75S | St/by only with LED flashing | R423 overheats - DZ302 33v zener & IC301 TDA8351 | ||
| Samsung | CR5035 | Dead aft storm | STRS 6707 D404 (15Volts start up for Drive ) TDA 7056 audio chip ( no sound ) TDA8362 Jungle chip no OSD | ||
| Samsung | CICI6229 | FRAME COLLAPSE | REPLACE C808 IC301 | ||
| Samsung | CI7230 U88MT | Picture shifted to the left. As a result the extre | Badly dryjointed connection at the anode of D405 ( BYD33 ) in the line output stage. | ||
| Samsung | CI7230 | Pic shifted to left with EW mod dr Tr smoking | Dry joint anode D405 BYD33 in LOP | ||
| Samsung | CI6844N SCT12B | Service adjust proc | 1. Press standby, display, menu, mute, standby, OR Press standby, picture standard, help, sleep, standby OR Press standby>display>menu>mute>power on option bytes : : 1 zoom mode: wide/normal/zoom: 2 audio mode: nicam stereo: 3 one chip: TDA8844 : 4 led option: normal: 5 language: west eng/ger/dut/spa/ita/swe: 6 system: CI : 7 ats option: on: 8 field pol: field pos :: having set the option bytes , press menu key and reset message should appear on the screen. : [the zoom, one chip and field pol bytes are set according to the size and type of crt]. |