| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDTR5 | DOOR WILL NOT CLOSE | The TP arm block assembly (page 215, reference number 175) hadcome out of unit. The T protector assembly was bent. Replaced theseparts (including washers and joint bar). Unit would close and start toload. Then unit would jam due to misalignment of TP | ||
| Sony | ICF2010 | INCORRECT SCAN | After entering the lower and upper scan limit frequencies in,the unit would not scan correctly after pressing the scan start button.This also pertains to serial numbers 302902, 302903 and 303001. | ||
| Sony | STRGX6ESII | INSULATING MICA PART NUMBER | I need the part number for the insulating mica for the outputtransistors (2SC2921/2SA1215). Not listed in two page service manual forthis model and different than those used in GX6ES. Because of the largesurface area and suction of heat-sink compound, | ||
| Sony | D160 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D180 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D9 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D4 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | D2 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | CDXR79 | REPLACEMENT OPTICAL BLOCKS | Replacement blocks coming through with pin 3 and 4 solderedtogether on 12 pin flex connector. This is just a little drop of solderwhich can easily be overlooked and cause the block not to work wheninstalled. This also is true on other models. | ||
| Sony | CFS902 | PART NUMBER LISTED FOR S302 IS WRONG | Part number 1-570-347-31 is a two-position switch. This isthe wrong switch. It needs to be a three-position switch. | ||
| Sony | CFS903 | PART NUMBER LISTED FOR S302 IS WRONG | Part number 1-570-347-31 is a two-position switch. This isthe wrong switch. It needs to be a three-position switch. | ||
| Sony | KV13TR10 | CRT | CRT in unit has the CRT, coil (degauss) and metal shield asone complete unit. Replacement CRT comes just with the CRT. We need thecomplete assembly part number. -HQ COMMENTS: There are two types of CRTs being used - one is in theservice manual. The o | ||
| Sony | KPR41DS1 | SPOTS ON SCREEN,DUST BETWEEN SCREENS CLEANED | There were spots on the screen, one big one toward the bottomright hand portion of the screen. Took screens apart and found fine dustparticles. With a fine brush I was able to clean both screens. With thescreens rubbing together in shipping, there mus | ||
| Sony | KPR41DS2 | SPOTS ON SCREEN, SEE TV SERVICE BULLETIN # 17 | There were spots on the screen, one big one toward the bottomright hand portion of the screen. Took screens apart and found fine dustparticles. With a fine brush I was able to clean both screens. With thescreens rubbing together in shipping, there mus | ||
| Sony | STRAV910 | WRONG PART NUMBER FOR 6 PIN OUTPUT JACKS J403-J405 | The part number listed in the manual for the output jacks areall the same regardless if it is a 4 pin or 6 pin jack. |