| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CCDF30 | NO SYNC ON CAMERA VIDEO | No sync on camera video. | ||
| Sony | XR66 | SERVICE BULLETIN CORRECTION - NO EJECT SYMPTOM S/B NO. 164 | Service bulletin No. 164 states that to resolve anintermittent No Eject problem, IC-701 has been changed from TC9310N-065to TC9312-040, and change R-719 from 27K to 47K. The type numbers arecorrect for XR-740/780/787R, but incorrect for XR-66. | ||
| Sony | CCDTR5 | LOW LUMINANCE ON SELF-RECORDED PLAYBACK | Distorted picture on playback of self-recorded tape. | ||
| Sony | KV27HSR10 | VERTICAL PROBLEMS, C-504 COLD SOLDERED ("A" BOARD) | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV32HSR10 | VERTICAL PROBLEMS, C-504 COLD SOLDER | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV27XBR60 | VERTICAL PROBLEMS | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV27XBR10 | RETRACE LINES ON BOTTOM OF SCREEN , COLD SOLDER C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV32XBR70 | VERTICAL PROBLEMS, RESOLDERED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV32XBR10 | VERTICAL PROBLEMS, RESOLDERED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV27XBR65 | VERTICAL LINES ON BOTTOM OF SCREEN, REPLACED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV27XBR15 | VERTICAL PROBLEMS, RESOLDERED C-504 (IC-500/PIN 5) | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | KV32XBR65 | VERTICAL PROBLEMS, REPLACED C-504 | I have now seen several models, ANU-1 chassis that exhibitwhat looks to be an odd type of retrace at the bottom of the screen.There may also be a few lines missing in the middle of the screen. It isunlike vertical problems I have seen in the past. The | ||
| Sony | FH110WX | REFERENCE NUMBER CORRECTION - GEAR (B) CAM | On page TC-29 of the S/M, there are two parts shown that arereferenced as number 163. One is the Flywheel and the other is Gear (B)Cam. | ||
| Sony | D9 | UNIT WILL WORK WITH BATTERY BUT WILL NOT WORK W/AC ADAPTOR | Unit will work with battery, but will not work with ACadaptor. | ||
| Sony | GEN-CAM | PART NUMBER FOR POWER CORD | What is the part number for the cord which connects AC poweradaptor to the camcorder? -HQ COMMENTS: The part number for the cord which connects an AC poweradaptor to the camcorder is 1-559-354-21. |