Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | AVK715M | COLOR CODE ON CABLE IS WRONG | Video input has a yellow band on it to distinguish it fromthe audio input. These two inputs are reversed. Audio input is the onewith the yellow band. -HQ COMMENTS: Because some non-Sony TVs employ the reverse L shape typestereo mini plug, the yellow b | ||
Sony | KV27XBR10 | SINGING YOKE, REPLACED YOKE, SEE SERVICE BULLETIN 114 | Loud Singing noise from Yoke | ||
Sony | CCDTR5 | UNIT LOADS HALF WAY/DRUM FAILS TO CHANGE DIRECTION/UNLOADS | Pin 64 of IC-601 would not go H for the proper duration oftime when loading. If you stop the drum with your finger, when thedirection change was supposed to occur the unit will load. | ||
Sony | WMAF57 | ENGAGING OF PLAY BUTTON | Due to the mounting of the PCB, the PLAY switch becomesdifficult to engage. | ||
Sony | WMAF50 | ENGAGING OF PLAY BUTTON | Due to the mounting of the PCB, the PLAY switch becomesdifficult to engage. | ||
Sony | WMAF48 | ENGAGING OF PLAY BUTTON | Due to the mounting of the PCB, the PLAY switch becomesdifficult to engage. | ||
Sony | WMA26 | ENGAGING OF PLAY BUTTON | Due to the mounting of the PCB, the PLAY switch becomesdifficult to engage. | ||
Sony | RMX2 | POWER HARNESS SCHEMATIC IS WRONG | Page 8 of the S/M shows CN-801 as a 9 pin connector, but theharness is shown as only having 4 wires. Page 10 of the service manualshows all nine pins being used. The installation manual shows actualcolor code which is correct. -HQ COMMENTS: The instal | ||
Sony | CCDV5000 | NO EJECT/TAPE JAM | Tape jam and no eject. | ||
Sony | MPKF40 | MODELS COMPATIBLE WITH THE MPK-F40 | Which models will fit in the MPK-F40? | ||
Sony | MPKV11 | MODIFICATIONS FOR USE WITH CCD-V99 | Some MPK-V11s do not accommodate the CCD-V99. | ||
Sony | GVM2000 | SUPPORT BRACKET PART NUMBER (A BOARD) | Support bracket for the A board on the GVM-2000 is needed.No part number is listed for this item in the service manual. -HQ COMMENTS: The part number for this item is 4-393-914-02. Pleaseupdate your service manual. | ||
Sony | KV27XBR50 | PART NUMBER FOR POWER SWITCH IS WRONG, 1-571-532-21 | Part number for the power switch is incorrect in servicemanual. -HQ COMMENTS: The correct part number is 1-571-532-21. Please make theappropriate corrections to your manual. | ||
Sony | SL2700 | PART NUMBER FOR CASSETTE IN SWITCHES | On page 169 of the service manual, there is no partnumber for the CASSETTE IN micro switches (next to items 370 and 371). | ||
Sony | SPPS10 | NO HANDSHAKE BETWEEN BASE AND HANDSET | Intermittent no handshaking between handset and base. When ACadaptor input is shaken, sometimes unit works. |