MG3.1E Service Mode (Modo de Serviço)
Chassis:MG3.1E
Marca
Mod.
Ch.
Tipo
Modo
Proced.
File
Philips
CTV
Service Mode
Option 1: In the TV-set itself is a 3-pin connector with which either SERVICE-DEFAULT or SERVICE-MODE can be activated. This connector is depicted 0356 (SERVICE-PINS) on page K7 (TXT&CONTROL). Shorting pins 1-2 will activate SERVICE-MODE. Shorting pins 2-3 will activate SERVICE-DEFAULT. Option 2: Activate these modes using the remote control. Obviously option 2 is the preferred method because the settings have to be changed using a remote control anyway.... To activate SERVICE-DEFAULT: Press 0 6 2 5 9 6 and then the [menu] button. The message 'Service Default' appears and channel 'SER T' will be selected. This only sets some settings to a preset value (color/brightness/volume and such). This mode is primarily intended to be used when the non volatile memory has been replaced. It is then loaded with the default values. To activate SERVICE-MODE: Press 0 6 2 5 9 6 and then the [i+] button. After pressing 0 6 2 5 9 6 the message 'Dealer' should have appeared. Do not worry about the channel changing while you press the numbers. Service technicians have t service mode using a spe
Universal LED TV Service Mode
Most universal led tv boards check:
- Menu → 1147
- Menu → 2580
- Source → 2580
All LED TV Service Codes
- Menu → 1147
- Menu → 1185
- Menu → 1183
- Menu → 2580
- Menu → 1187
- Menu → 7050
- Menu → 8202
- Menu → 7343
- Menu → 2008
- Menu → 1999
- Menu → 0000
- Menu → 1167
- Menu → 1199
- Menu → 1234
- Menu → 2387
- Menu → 8893
- Menu → 2383
- Menu → 4725
- Source → 3138
- Source → 2580
- Source → 2585
- Source → 7342
- Source → 2583
- Source → 2283
- Source → 2285
- Source → 3195
- Source → 3137
- Source → 0000