| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Mitsubishi | Euro 6 | No col | IC252 TDA3565 running hot and faulty | ||
| Mitsubishi | Euro 6 | Int shutdown & poor response to R/C & OSD corrupted | C960 dry joints | ||
| Mitsubishi | Euro 6 | Int patterning | C920 470µ 25v | ||
| Mitsubishi | Euro 6 | Dead with squeal | s/c across lop traced to Loptx s/c between pins 1 (HT) & Chassis pin 7 ; LOPTx 334B08109 = HR7685 £13.25 CPC | ||
| Mitsubishi | Euro 4Z CT2153STX | Flashing pic for first hour | Carbonised glue on RGB panel - remove | ||
| Mitsubishi | Euro 4Z | Weak smeary pic | 12v supply missing at Q253 Y amp due to crack in print top edge of pcb by plastic retainer | ||
| Mitsubishi | Euro 4Z | Tuning drift | Check for dry joints & caps in IF can | ||
| Mitsubishi | Euro 4Z | Sound int lost | Q706 JA101QR muting switch | ||
| Mitsubishi | Euro 4Z | Sound int & fades - goes off with a bang | Q3005 dry joints in audio module | ||
| Mitsubishi | Euro 4Z | No txt but comes on when not requested at sw on | Check SAA5243 chip & C922/923 100µ in 5v feed | ||
| Mitsubishi | Euro 4Z | No sync | IC7706 SAA5243P/E on txt pcb | ||
| Mitsubishi | Euro 4Z | Field scan rippled | remove brown gunge from print side of pcb where extra components have been added | ||
| Mitsubishi | Euro 4Z | Dead LOPTr fails at sw on | S/C line scan coils | ||
| Mitsubishi | Euro 4Z | Dead - Z902 650mA cct prot o/c & 5v reg o/c | Caused bt s/c across 5v rail - IC7704 MAB8461-W115 on txt pcb | ||
| Mitsubishi | Euro 4Z | Buzz on chan change & no mono sound | 6Mhz resonator X3 in IF module |