Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Mitsubishi | Euro 4Z | Broad horiz black bands at sw on | C922/923 100µ 5v smoothers | ||
Mitsubishi | Euro 4Z | Black lines , poor sync, no txt (until warm) | C959, 962 100µ | ||
Mitsubishi | Euro 4 | Won't store chans - prev stored ones ok | No -30v to EEPROM - comes from st/by tfmr - had o/c winding | ||
Mitsubishi | Euro 4 | Severe patt at sw on | C920 470µ 25v | ||
Mitsubishi | Euro 4 | rolling / excessive width | HT hi at 180v; C908 10µ 100v -40v reservoir cap u/s | ||
Mitsubishi | Euro 4 | Poor video/luma/flaring | Glue can cause tis problem - scrape off | ||
Mitsubishi | Euro 4 | Poor HT reg on bright scenes | C908 10µ 100v; C909 47µ 50v both 105deg | ||
Mitsubishi | Euro 4 | Pic int fades out | Dry joint pin 9 of socket to crt base | ||
Mitsubishi | Euro 4 | No tuning memory or signals - can be tuned in but not stored | No -30v at pin 2 IC702 tuning memory chip; standby trnfmr T951 had o/c sec winding which was possible to repair - also could be C958/C562 | ||
Mitsubishi | Euro 4 | No start up | R975 o/c; Q951 s/c | ||
Mitsubishi | Euro 4 | No sound/pic - HT ok | No line drive as line dr trfmr dry joints | ||
Mitsubishi | Euro 4 | No raster - sound ok - field collapse | No 24v to FOP chip IC401 AN5521 at pin 27, R563 0R82 safety res o/c - chip also suspect | ||
Mitsubishi | Euro 4 | Int luminance with parts of pic breaking up | IC602 TDA4565 virtually no o/p pin 11 - chip faulty | ||
Mitsubishi | Euro 4 | HT varies with brightness & corrugated verts | R913 hi res contact at mounting lugs; HT = 110v for 51cm | ||
Mitsubishi | Euro 4 | Horizontal lines & streaks | C920 470µ in 15v supply line or C908 10µ 100v or C925 10µ 25v |