| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Mitsubishi | CT21A3STX | SOUND MUTES INT | Q1A1 ON DET PCB Pt No 260P543050 | ||
| Mitsubishi | CT21A3STX | Pattern obliterates sound/pic - ok via scart | C9, 13, 21 & 26 0µ47 in IF unit | ||
| Mitsubishi | CT21A2STX etc | Dead - LOPTr Q522 s/c | C905 (470µF, 35V), C906 (47µF, 50V), C909 (2.2µF, 50V) and C920 (100µF, 25V).Note that the transistor type varies with screen size, With a 21in. tube it's type 2SD1877, part no, 260P606010; with a 25in, tube it's type 2SD1878 (part no, 260P607010) while with a 29in. CRT it's type 2SD1879 (part no. 260P608010), | ||
| Mitsubishi | CT21A2STX | Dead - Q901 s/c. | Fit mod kit ( wVe 77901 ) R901 , D908 , Q901 , C908 to 2700pf , C966. | ||
| Mitsubishi | CT21A2 | WHINE ON NICAM RECEPTION ONLY | LINK C3346 & C3342 CATHODES | ||
| Mitsubishi | CT2155STX CT215 | PATTERNING ON PIC FROM COLD | C920 ( 470uF ) C925 ( 10uF ) & D/J around IC902 | ||
| Mitsubishi | CT2155STX | Herringbone patterning | Check dry joints IF module, or caps around 12v reg IC902 & caps in psu pri | ||
| Mitsubishi | CT2155STX | herringbone pattern | C920 470µ 25v | ||
| Mitsubishi | CT2155 | Int blank raster. | Drys around the SAW filter or coils L4/5 , if not mod kit AFT1 mits | ||
| Mitsubishi | CT2155 | Ghosting or ringing. | Drys around the SAW filter or coils L4/5 , if not mod kit AFT1 mits | ||
| Mitsubishi | CT2153STX | NO GREEN ANALOGUE DISPLAY | FRONT MICRO ic.701 | ||
| Mitsubishi | CT2153STX | No chan or analogue value store | Check pin 2 IC702 EEPROM chip. If not 30v then check C962 100µ 50v | ||
| Mitsubishi | CT2153STX | Lines across top half of pic - clears when heated | sec PSU caps C920 470uF/25V, C925 10uF/25V, C923 100uF/10V, C922 100uF/25V | ||
| Mitsubishi | CT2153STX | Int fluctuating pic with bright flashes for first 1/2 hr | Glue on VC/RGB/CTI pcb at top bracket become resistive - remove glue | ||
| Mitsubishi | CT2153STX | Dead with red LED lit | 110v prot zener s/c. Changed C908 10µ 100v & C909 47µ 50v & STR59041 & check hi value res in psu pri |