| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Mitsubishi | CT2153STX | Comes on in st/by - will sw on but no memory of chans or analogue levels | 30v supply to EEPROM low at approx 20v - C962 100µ 50v | ||
| Mitsubishi | CT2153 CT2155 | GHOSTING RINGING OR INT PIC | CHECK FOR DRYS NEAR SAW FILTER L4 L5 OR FIT MOD KIT AFT1 | ||
| Mitsubishi | CT2146TX | Flashing pic | X7702 6Mhz Xtal on Txt panel | ||
| Mitsubishi | CT2146T | When replacing LOPTx with Konig type | If width is narrow after replacement of trfmr & tuning cap - refit orig cap | ||
| Mitsubishi | CT2142TXV | Loss of sync | TDA2579 IC501 | ||
| Mitsubishi | CT212STX | Slow start up | C962 100µ 50v o/c - corroded leg & check for dry joints esp R902/916 | ||
| Mitsubishi | CT2125TX | user settings wont store | minus30v pin 2 eeprom IC702 low. C962 leaky also check other electros | ||
| Mitsubishi | CT2125TX | Tuning slightly off - unable to fine tune | IC101 MS1496P | ||
| Mitsubishi | CT2125TX | Sound wont go off | Pin 4 audio chip hi at 2.3v (0.3v) - D361 1N4001 leaky | ||
| Mitsubishi | CT2125TX | Sound - will not tune right down or mute. | D361 ( 1N4148 ) leaky. | ||
| Mitsubishi | CT2125TX | SLIGHTLY OFF TUNE | REPLACE IC101 | ||
| Mitsubishi | CT2125TX | No video | Z951 630ma fusible link in 8.5v line on psu | ||
| Mitsubishi | CT2125TX | No sound mute. | D361 ( 1N4148 ) | ||
| Mitsubishi | CT2125TX | Large black square int covers screen, floats left or right & int poor contrast | C959 100µ 25v hi esr causing low 5v supply from reg - also check C964 10µ 50v, C962 100µ 50v, C905 470µ 25v | ||
| Mitsubishi | CT2125TX | Int blowing line transistor. | STR54041 , clean & resolder pins of line driver transformer. |