Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | HST201 | PART NUMBER MISSING IN SERVICE MANUAL | The Service Manual doesn't list a P/N for part reference no.169 on page 24. There are also two reference number 158 parts shown indiagram. | ||
Sony | KV27XBR15 | CLOCK GAINS TIME, ADD .1 UF/50V BETWEEN Q-105 BASE TO GROUND | Clock gains time. | ||
Sony | D180K | STATIC INSTEAD OF AUDIO | Static instead of audio. | ||
Sony | CDPC75ES | POWER ON/NO FUNCTION | When unit was turned on, it would display multiple white dotsand would not accept any commands from front pannel or remote. Problemseemed to be constant. | ||
Sony | CDPC700 | DISC TRAY CONTINUOUSLY ROTATES BACK AND FORTH | Disc tray would rotate back and forth when unit was turned on.You could open and close tray but tray would continue to rotate back andforth. | ||
Sony | TAE1000ESD | PART NUMBER FOR DISPLAY PCB WITH ALL COMPONENTS | We are trying to order a mounted display board with allcomponents. The service manual only lists a bare PCB. Is it possible toget a complete board? -HQ COMMENTS: According to KCPs information, you can't get a complete PCboard if the PC board has less | ||
Sony | CDXR7 | MISSING PART NUMBER FOR IC-352 | This particular unit at Kansas City SSC has an IC-352 on theMain board. It is a surface mount device with the number T8543H74HC04printed on it. It doesn't show up in the parts list or the schematic. Ihaven't found it in any bulletins, supplements, or | ||
Sony | KPR41DS2 | MISCONVERGENCE AFTER WARM UP, REPLACED NECK ASS'Y | authorized servicing dealer advised red would shift approx. 1inch after warm up. While troubleshooting as directed, they found theneck assy. on the CRT to be cracked in three places. The XR Board wasnot broken from the assy. Also found Neck Assy. crac | ||
Sony | SPP90 | BATTERY NOT LASTING - DISCHARGING | Battery not lasting in standby for full 20 hours. Some onlylast 12-16 hours. Others last even less. | ||
Sony | SPP60 | BATTERY NOT LASTING - DISCHARGING | Battery not lasting in standby mode for full 20 hours. Someonly last 12-16 hours. Others last even less. | ||
Sony | KV2791R | TUNER DRIFT, RESOLDER AROUND IC-201 AND IC-251 | Intermittly the picture would look like it drifted betweenstations. | ||
Sony | KV1943R | NO TUNING - LED CHANNEL INDICATORS ALL LITE UP, L-511 OPEN | Turn unit on, all channel indicators (LED) are lite up, noreception. Checked: 24VDC is missing from IC-034. | ||
Sony | KV1380R | NO PICTURE - NO AUDIO, REPLACED IC-103 | Unit received from another service shop with no display. Canturn on and off, cannot channel select or volume select. The service shopreplaced IC-101 and IC-301 on A board, still a problem (so they send tous). Checked and found missing data and clock e | ||
Sony | CCDV5000 | WHEN USING DIGITAL FUNCTIONS OVERLAP NOT SMOOTH | When in Standby mode, picture will jump when going fromdigital functions to clear. When using the overlap function, afteroverlap is completed, picture will jitter slightly. Checked adjustmentsto digital board and found them in specs. Jitter of picture | ||
Sony | CCDV5000 | OUTDOOR TOO RED AUTO SLIGHTLY OFF RED | After performing white balance adjustments, found outdoorpreset to be slightly red. Is there a way to compensate for this withoutaffecting the manual white balance setting? -HQ COMMENTS: The white balance adjustment should work OK. Please tryre-perfor |