| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | D143 | STATIC NOISE HEARD IN AUDIO OUT - REPLACE IC601 (875929718) | Static or noise heard in audio out. | ||
| Sony | D141 | UNIT POWERS UP THEN SHUTS DOWN WITHIN 2 SECONDS | Unit would power up but shuts down within 2 seconds. | ||
| Sony | D141 | NO DISPLAY - REPLACE IC801 (8-759-326-68) | No display. Unit functions ok. IC801 syscon, putting outabnormal/distorted pulses. All B+ and must haves read ok. | ||
| Sony | D141 | #S SWITCHED FOR M901/902 IN MANUAL | Reference numbers on page 31 of service manual for motorsswitched. M901/902 in break out are switched. | ||
| Sony | D141 | STATIC NOISE HEARD IN AUDIO OUT - REPLACE IC601 (875929718) | Static or noise heard in audio out. | ||
| Sony | CFD8 | NO POWER CD | The unit has no power CD that is caused by a little crack onthe main board. | ||
| Sony | CFD8 | GRINDING NOISE - REPLACE OPTICAL BLOCK | When no cd in unit, sled motor won't move. When cd in unitsled motor is turning continuously. | ||
| Sony | CFD8 | SB AUD 0328 | Replaced IC801 per s/b, now cd shuts down after 9 hours ofcontinuous use. Optic and cables ok. -HQ COMMENTS: The s/b was due to a different symptom as you know. Thisunit could have an intermittent problem. | ||
| Sony | CFD8 | 16P HARNESS CNP701 | There is no part no. for the 16P harness that connects theop block, kss213, to main board. Diagram can be found in supplement 1 ofthe CFD8 SM. -HQ COMMENTS: The part number can be found in the CFD9 service manual,ref 51. It is 1-769-789-11. | ||
| Sony | CFD758 | IC704 DIFFERENT | Unit has different IC704 then s/m. Unit uses SKA9258Dinstead of BA6296FP. Is it compatible? Original symptom was no sledmotor operation. When BA6296FP installed, the spindle motor would run athigh speed. Reinstalled original and original symptom | ||
| Sony | CFD750 | POPPING NOISE IN AUDIO AFTER POWER UP | Any mode, audio would pop every few seconds | ||
| Sony | CFD616 | ERROR CODE 90 | When ac first plugged in there is no initialization of unit,no power on, and no back light. Display does show the words ERROR 90.any ideas what this error code is? -HQ COMMENTS: This question was faxed to Tokyo. As soon as Tokyoanswers, we will info | ||
| Sony | CFD616 | MECHANICAL JAMMMED AND MISALIGNED | Mechanical jammed and misaligned. | ||
| Sony | CFD610 | DISC WOULD NOT SPINCD PALYER SLED | Discs would not spin and unit would read discs take out, ordiscs would spin and make a thumping or rubbing sound and unit would skipbadly. | ||
| Sony | CFD606 | CD MECHANISM JAMMED | CD mechanism jammed. Very common problem with this modeland similar models, CFD616/626. A disk was found in main tray assy ref217, without a disc holder . |