Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | D4 | DEFECTIVE OPTICAL BLOCKS | Had to try four pick-ups before I got one that would light up. -HQ COMMENTS: The optical block for D-4 has shorting pads to protect thelaser against static charge. The solder bridge on the flex connector mustbe removed to allow the laser to fire. | ||
Sony | D2 | DEFECTIVE OPTICAL BLOCKS | Had to try four pick-ups before I got one that would light up. -HQ COMMENTS: The optical block for D-2 has shorting pads to protect thelaser against static charge. The solder bridge on the flex connector mustbe removed to allow the laser to fire. | ||
Sony | SPP60 | PART NUMBERS MISSING - IC4 AND IC5 | There are no part numbers listed in the service manual forIC-4 (LR-4089) and IC-5 (UC-1241). We need part numbers. -HQ COMMENTS: Part number for IC-4 (LR-4089) is 1-807-445-11. I willhave to ask Tokyo for the part number for IC-5.To Tokyo: Please inf | ||
Sony | ITM300 | WRONG PART RECEIVED - HANDSET | The handset received is two tone in color (beige/white) anddoes not have the indentation for the wall-mount hook. Is this thecorrect part number? -HQ COMMENTS: The part number is correct. Kansas City Parts had re-ceived the wrong part from Tokyo sever | ||
Sony | ICF6800W | WRONG PART RECEIVED - PUSHBUTTON SWITCH S3, S4 AND S5 | The part received from Kansas City Parts is a rotary typecontrol. It should be a pushbutton switch. The original part numbersubstitutes to 1-553-561-00. Is this correct? -HQ COMMENTS: The part number is correct but KCPs stock is incorrect.They are co | ||
Sony | XR7180 | CAR STEREO SERVICE BULLETIN NO. 148 | The service bulletin shows two points on the amp PCB that mustbe connected with a jumper wire. The points shown are B+ and GRD. Thismust be incorrect. What are the correct points? -HQ COMMENTS: You are correct. The service bulletin is incorrect.Plea | ||
Sony | CRF1 | LAST TWO DIGITS OF DISPLAY FLICKER | When the unit is locked on a station, display is fine. Thedisplay flickers only when the unit is not properly locked on a station.Unit works fine otherwise. -HQ COMMENTS: Sounds like PLL is over-reacting. Please try the PLLalignment procedure. You ma | ||
Sony | KV5100 | INSUFFICIENT WIDTH | Insufficient width. Picture only in center 2/3 screen. | ||
Sony | CCDV9 | HORIZONTAL LINES IN PICTURE DURING RECORD OR PLAYBACK | White horizontal lines scrolling thru raster whether camera isbeing monitored on EVF or on playbacK. | ||
Sony | KV2062AEB | INCORRECT IC SUBSTITUTION | Need answer to previous inquiry. CX519-004p 8-759-600-63 substo CX523-117P 8-759-603-67. This is the controller IC. Substitute ICwill not work. Original IC works, but is missing some functions. Sub ICwill not perform any function. When the original | ||
Sony | KV2072ME5 | INCORRECT IC SUBSTITUTION | Need answer to previous inquiry. CX519-004p 8-759-600-63 substo CX523-117P 8-759-603-67. This is the controller IC. Substitute ICwill not work. Original IC works, but is missing some functions. Sub ICwill not perform any function. When the original | ||
Sony | GV8 | BATTERY RELEASE BUTTON PART NUMBER | What is the part number of the battery release button on theGV-8? -HQ COMMENTS: The part number is 3-728-948-11. | ||
Sony | SPP110 | SCANNING NOISE IN BACKGROUND | The SPP-110 is used in a house with other non-cordless phones.When the other phones are used, a scanning (swooshing) noise can be heardin the background. Is this normal? -HQ COMMENTS: Yes, it is normal. It is more likely to be picked up onother cordle | ||
Sony | SPPS10 | UNIT WOULD NOT OPERATE | Base unit was locked up. When AC adaptor was plugged in, unitwould not operate. Found problem in reset circuit. | ||
Sony | STRGX4ES | PROTECT COMES ON INTERMITTENTLY | Unit would go into protect mode intermittently. I found badsolder connection on (Display Board) where C-330 and R-347 are solderedto the board. This is on the protect line to IC-301 pin 36 and providesthe 5V B+ to this pin. Physically, C-330 and R-347 |