Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
---|---|---|---|---|---|
Sony | CDPC50 | PART NUMBER FOR REAR FOOT - REFERENCE NUMBER 35 | The original part number (X-4922-505-1) for the Rear Foot(reference No. 35) gets substituted to part number X-4922-508-1. Thisfoot is too large in size. It is the size of the front feet of the unit.We need the correct part number. -HQ COMMENTS: The re | ||
Sony | KV2782R | INCORRECT PART NUMBER IN SERVICE MANUAL | Part number in service manual (page 19, Ref. No. 6)9-910-999-51, is incorrect. The same part number 9-910-999-51 is foundin the KV-2680R service manual on page 46, Ref. No. 9 .... the samesolution applies. | ||
Sony | SPP60 | NO PART NUMBER FOR SPEED DIAL LABEL | There is no part number in the service manual for the speeddial label on the handset. -HQ COMMENTS: Faxed Tokyo. Their response was that this will not be asupplied part. They suggested that the customer make it themselves. Wewill suggest to Tokyo that | ||
Sony | SPP100 | REPLACEMENT MICROPHONE IS TOO SMALL | The original part number (8-814-186-00) substitutes to a newpart number (1-542-092-11). The replacement microphone is too small. Isthis a correct substitute? -HQ COMMENTS: I have contacted Tokyo with this question.11/20: The part number no longer subs | ||
Sony | RMX2 | NO PART NUMBER FOR 12-PIN SOCKET | There is no part number listed in the service manual for the12-pin socket on the tuner in PCB (B board). The part number listed inthe service manual for reference No. 909 the PCB (1-625-386-11) is for theblank board only. | ||
Sony | CDPC7ESD | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | CDPC70 | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | CDPC50 | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | CDPC40 | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | CDPC30 | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | CDPC26 | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | CDPC20 | BROKEN PULLEY CHUCKING | I have found the Pulley Chucking broken in several units. Ihave replaced the Pulley Chucking and on a few units they have come backin a few weeks with the same problem. I found by melting and spreadingout center of the Pulley Chucking so it overlaps th | ||
Sony | SPP50 | SPP-50 SERIAL NUMBER SAME; CHANNELS DIFFERENT | Serial numbers on handset and base same but base unit usedchannel NO. 10, while handset used channel NO. 4. | ||
Sony | CDPC500 | INCORRECT PART NUMBER | The part number in the service manual on page 20 shows thestep screw with the part number 7-685-666-79. This part number comes upas a standard thread black screw. The correct part number is needed. -HQ COMMENTS: Tokyo has supplied the correct part num | ||
Sony | CDPC400 | INCORRECT PART NUMBER | The part number in the service manual on page 20 shows thestep screw with the part number 7-685-666-79. This part number comes upas a standard thread black screw. The correct part number is needed. -HQ COMMENTS: Tokyo has supplied the correct part num |