| Marca | Modelo (Chassis) | Sintoma | Causa | Solução | Por: |
|---|---|---|---|---|---|
| Sony | CDPC505 | INTERMITTENT LOADING - UNLOADING | Intermittent loading - unloading caused by a white powderysubstance on item 114 described as loading a gear and surroundingcomponents. | ||
| Sony | SLV676UC | INTERMITTENT REMOTE FUNCTIONS | Remote system would accept one command and then lock-up.Front panel functions all normal. Scoped output of remote receiver preampCatcher Block. After first command, no output. | ||
| Sony | CCDG1 | COMPATIBILITY WITH GV-200 | The GV-200 is compatible with the CCD-G1 camera with use of anoptional AC adapter, model HVAG1. The adapter is needed because theGV-200 does not have the 12-pin connector. The GV8, GV9 and GV-300 havethe 12-pin connector so no adapter is needed. Note | ||
| Sony | GV200 | COMPATIBILITY WITH CCD-G1 | The GV-200 is compatible with the CCD-G1 camera with use of anoptional AC adapter, model HVAG1. The adapter is needed because theGV-200 does not have the 12-pin connector. The GV8, GV9 and GV-300have the 12-pin connector so no adapter is needed. Note | ||
| Sony | RD500 | PART NUMBER MISSING | Service manual shows both supply and take-up tables as samepart number. The tables are different, as one has a clutch. -HQ COMMENTS: Please use the Reel Table Ass'y A-3125-012-A for bothsupply and take-up sides. It has been confirmed the same part doe | ||
| Sony | BM18 | WRONG PART | This IC is being shipped in chip component style. The dealerrequires chip style with PC leads. | ||
| Sony | BM246 | INCOMPLETE PART | The replacement cover is not shipped complete, a damper(plunger) is missing. -HQ COMMENTS: The Damper P/N is 3-319-224-31. Please refer to page 20of BM-246 Service Manual Supplement-1. There is no other part required toinstall this damper other than t | ||
| Sony | KV32XBR10 | SEVERE PINCUSHION DISTORTION, REPLACED Q-505 | Severe pincushion distortion. Actually, no horizontalpincushion correction occurring. Found Q-505 open, emitter to base. | ||
| Sony | CDPC75ES | TRAY SLOW IN OPERATION | Carousel tray was very slow in going in and out. Also hadtrouble bringing optical assembly up. | ||
| Sony | XR4140 | PART NUMBER FOR Q102 IS INCORRECT | Part number for Q-102 is incorrect. | ||
| Sony | SLV757UC | PART NUMBER | Kansas City Parts does not recognize the part number but ifyou change the last digit (X-3729-935-3) it shows the item. The -3 isused in the SLV-353UC. Looking at the item on page 105, item 204 of theSLV-353UC, it looks the same as item 305 page 155 of | ||
| Sony | SLV757UC | PART NUMBER INCORRECT IN MANUAL | Check in the service manual of model SLV-353UC Ref. No. 204X-3729-935-3. This part is a good number Ref. No. X-3729-935-1 is not. | ||
| Sony | XVD300 | NO FEED-THROUGH VIDEO | Special effects ok, no straight-through video when DigitalOff selected. No change of state at pin 100, IC-109 (Digital ON/OFF),pin 42 IC-109 (SOC) disappears when digital OFF. Selected giving blankscreen - video no longer clocked through system and no | ||
| Sony | KV19TS20 | MANUAL POWER ON, POWER OFF ERRATIC - REPLACE MEMORY IC-102 | Using remote control, power ON/OFF function always works.When the unit is cold, front panel power ON works but power OFF does not.Sometimes after warmup, front panel power OFF works, but power ON quitsworking. Unplugging/replugging the unit always gener | ||
| Sony | SLHFT7 | DRUM SERVO WILL LOCK IN PLAYBACK BUT NOT IN RECORD | Drum servo would not lock in RECORD mode. Playback wasnormal. V Sync and PG were present at IC-001 and of proper levels. Drumphase error at pin 46 of IC-001 was normal. Voltage at pin 33 (lockphase) was normal. |